R: [teqc] teqc RINEX header editing

CAPUA ROBERTO rcapua at sogei.it
Thu Sep 2 10:55:53 MDT 2004


Since I was rejected, I resend you a cut copy of the files.In the zip: in ROMA2140.04o the RINEX I want to modify within the header, in header.cfg the header I want to use, in temp.04o the result of the process. For instance, old comments are present together with new ones. On the other hand, if I'd like to generate from an ashtech u file a Rinex with the same kind of header (using the -ash u option) I obtained an empty rinex file. I cannot the u file for size constraint on your mail server. Of course I can use on line command (-O.c and others), but I would like to parametrise it through a ++config command.

Roberto Capua
SOGEI - Società Generale d'Informatica
Via Mario Carucci, 99 
00143 Roma Italia
Tel/Fax: +390650253428/4135
e-mail: rcapua at sogei.it


-----Messaggio originale-----
Da: CAPUA ROBERTO 
Inviato: giovedì 2 settembre 2004 18.26
A: 'teqc support'
Oggetto: R: [teqc] teqc RINEX header editing


Dear Lou,

Thanks. In the zip: in ROMA2140.04o the RINEX I want to modify within the header, in header.cfg the header I want to use, in temp.04o the result of the process. For instance, old comments are present together with new ones. On the other hand, if I'd like to genrate from an ashtech u file a Rinex with the same kind of header (using the -ash u option) I obtained an empty rinex file. I attached the u file also within the zip. Of course I can use on line command (-O.c and others), but I would like to parametrise it through a config file.

Regards,



Roberto Capua
SOGEI - Società Generale d'Informatica
Via Mario Carucci, 99 
00143 Roma Italia
Tel/Fax: +390650253428/4135
e-mail: rcapua at sogei.it


-----Messaggio originale-----
Da: teqc-bounces at ls.unavco.org [mailto:teqc-bounces at ls.unavco.org] Per conto di Lou Estey
Inviato: giovedì 2 settembre 2004 15.52
A: teqc support
Oggetto: Re: [teqc] teqc RINEX header editing


Dear Roberto,

> I'm trying to format RINEX header. I generated an header config file 
> from a suitable RINEX file using teqc ++ config <rinex file> > 
> my_obs_config, I updated the fields in my_obs_config and then I 
> applied the new header using the command teqc -config my_obs_config 
> <rinex file>  > <new rinex file>. The new RINEX file seems to present 
> old header fields mixed with new ones. Could you tell me the correct 
> procedure for header formatting using teqc?

Sounds like you are doing everything AOK.  Can you snip out
the "before" and "after" headers and send those along so we
can see what you are seeing?

BR,
--lou

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Louis H. Estey, Ph.D.              office:  [+001] 303-381-7456
UNAVCO, 6350 Nautilus Drive           FAX:  [+001] 303-381-7451
Boulder, CO  80301-5554            e-mail:  lou  unavco.org
    WWW:  http://www.unavco.org   http://jules.unavco.org

"If the universe is the answer, what is the question?"
                                                -- Leon Lederman ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

_______________________________________________
teqc mailing list
teqc at ls.unavco.org
http://ls.unavco.org/mailman/listinfo/teqc
-------------- next part --------------
A non-text attachment was scrubbed...
Name: files.zip
Type: application/x-zip-compressed
Size: 3279 bytes
Desc: files.zip
Url : http://ls.unavco.org/pipermail/teqc/attachments/20040902/1895190c/files.bin


More information about the teqc mailing list