[teqc] Trimble and Binex

[Charles Carrano]

Thanks everyone. This is exactly the information I was looking for.

Best regards,
   Charles Carrano

Brian Frohring wrote:

>Charles/Lou,
>
>Here are the answers regarding BINEX support.
>
>The 4700/5700/R7 support BINEX with 0x7f-02 format observables, which
>have CNo values with 0.25 dB-Hz resolution.
>
>The NetRS supports BINEX with either 0x7f-02 or 0x7f-03 format
>observables, the latter of which support 0.1 dB-Hz resolution.
>
>Best regards,
>Brian Frohring
>
>
>
> > -----Original Message-----
> > From: teqc-bounces at ls.unavco.org 
> > [mailto:teqc-bounces at ls.unavco.org] On Behalf Of Lou Estey
> > Sent: Monday, January 31, 2005 12:27 PM
> > To: teqc support
> > Cc: charlie at radex.com
> > Subject: Re: [teqc] Trimble and Binex
> > 
> > 
> > > [...] I'm surprised that the R7 doesn't support Binex, 
> > though, because 
> > > its spec sheet says that it does (at the bottom right on the first 
> > > page):
> > > 
> > > 
> > http://trl.trimble.com/docushare/dsweb/Get/Document-140051/Sp
> > ec_Sheet_
> > > -_R7_-_English.pdf
> > > 
> > > The same is true for the R8. I'll follow up on this issue with the 
> > > folks at Trimble, in case it's a misprint. Do you know how I might 
> > > contact Mr. Frohring, or might he respond to an inquiry 
> > posted to this list?
> > 
> > Maybe the R7 and R8 do support BINEX; I don't know one way 
> > or the other. Brian is on this list and frequently responds 
> > to specific questions regarding Trimble.
> > 
> > --lou
> > 
> > _______________________________________________
> > teqc mailing list
> > teqc at ls.unavco.org
> > http://ls.unavco.org/mailman/listinfo/teqc
> > 
> > 
>
>
>  
>