[teqc] T00 trimble files

[Mullins, Steven]

Olivier,

	You might consider using BINEX if you want to skip the runpkr00 step.  I have not used BINEX in production from the NETRS.  Lou could tell you where TEQC stands reading BINEX from the NETRS.  It think is is pretty solid though.

Steve

-----Original Message-----
From: teqc-bounces at ls.unavco.org [mailto:teqc-bounces at ls.unavco.org]On
Behalf Of Lou Estey
Sent: Thursday, March 31, 2005 10:03 AM
To: teqc support
Subject: Re: [teqc] T00 trimble files


Olivier,

 > I probably missed something:
 > I am testing a NetRS station. The files I get are of .T00 type. Trimble
 > Europe tells me last version of teqc knows about it. [...]

You didn't miss anything; Trimble Europe is wrong ...

Mullins, Steven wrote:

 > You need to convert them to DAT files with the runpkr00 [...]

... and Steve is right.  Same applies for the earlier .r00 format
and the slightly newer .t01 format (from 5700/R7, 5800/R8): you
need to use runpkr00 to convert to a .dat/.mes fileset first.
(You don't need the .eph or .ion files, and the .mes file is optional.)

cheers,
--lou

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Louis H. Estey, Ph.D.              office:  [+001] 303-381-7456
UNAVCO, 6350 Nautilus Drive           FAX:  [+001] 303-381-7451
Boulder, CO  80301-5554            e-mail:  lou  unavco.org
    WWW:  http://www.unavco.org   http://jules.unavco.org

"If the universe is the answer, what is the question?"
                                                -- Leon Lederman
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

_______________________________________________
teqc mailing list
teqc at ls.unavco.org
http://ls.unavco.org/mailman/listinfo/teqc