[teqc] time to switch to +smtt as default?

[Lou Estey]

hi John,

Geoff Blewitt did a nice job summarizing here:
http://ls.unavco.org/pipermail/teqc/2005/000223.html

His option 1 is the current default teqc (`teqc -smtt ...`)
and option 2 is the proposed default teqc (`teqc +smtt ...`).

Short answer: -smtt outputs RINEX w/ time tags in local receiver time
(synced to GPS time at the start of the input raw file);
+smtt outputs RINEX w/ time tags in GPS time.  Both flavors of
RINEX conform to the RINEX specification.

--lou

> Hi Lou,
> 
> I don't know.  Can you give a brief summary of why +smtt is better, and 
> what difference it makes to the user?
> 
> Thanks,
> 
> John
> 
> --------------------------------------------------------------------------------------
> Dr John Beavan, GNS Science - Te Pu Ao, 
> 1 Fairway Drive, PO Box 30368, Lower Hutt, New Zealand
> Tel: +64 4 570 4641  Fax: +64 4 570 1440  Mob: 027 221 8861
> Email: j.beavan at gns.cri.nz    Web: www.gns.cri.nz
> 
> 
> 
> 
> 
> Lou Estey <lou at unavco.org>
> Sent by: teqc-bounces at ls.unavco.org
> 18/10/2006 08:59
> Please respond to teqc support
> 
>  
>         To:     teqc at unavco.org
>         cc: 
>         Subject:        [teqc] time to switch to +smtt as default?
> 
> 
> Dear all,
> 
> I thinking about changing the teqc defaults such that
> teqc would run with "+smtt" by default.  This would then
> require using "-smtt" to have teqc operate in its traditional
> fashion.
> 
> Any concerns?
> 
> --lou