[teqc] FCN of Glonass R17 satellite
Lou Estey
lou at unavco.org
Wed Jan 23 08:51:51 MST 2008
Uwe,
You'll have to send me a sample file or two so I can look at them. Send
the files to me, not the teqc list. If this is occurring with both Javad
JPS and Leica data (MDB format?), I'd need a sample of both.
--lou
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Louis H. Estey, Ph.D. office: [+001] 303-381-7456
UNAVCO, 6350 Nautilus Drive FAX: [+001] 303-381-7451
Boulder, CO 80301-5554 e-mail: lou unavco.org
WWW: http://www.unavco.org http://jules.unavco.org
"If the universe is the answer, what is the question?"
-- Leon Lederman
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> we use teqc for converting javad and leica raw data files to rinex.
>
> Since glonass satellite R17 is up, we see in the glonass navigation file
> no R17 navigation messages due to the fact that teqc rejects all
> navigation messages with fcn (frequency channel number) out of the range
> of -7 to +24:
>
> ! Notice ! GLONASS: bad frequency #= 255 being rejected (min= -7, max= 24)
> ! Notice ! GLONASS: bad frequency #= 254 being rejected (min= -7, max= 24)
>
> When we use for example jps2rin, for R17 a fcn of 255 is reported, but
> is included in the navigation file.
>
> We have this effect with all data collecting software(s) we use for
> javad and also with raw mdb files directly downloaded from the leica
> receiver.
>
> We are now not sure, whether it is a problem related to teqc or the raw
> data format of the receivers.
>
> The newest teqc is used:
> 2.10 G: GLONASS NAV DATA RINEX
> VERSION / TYPE
> teqc 2007Jun25 root 20080123 00:24:06UTCPGM / RUN BY
> / DATE
> Linux 2.4.20-8|Pentium IV|gcc|Linux|486/DX+ COMMENT
> teqc 2007Jun25 root 20080122 01:00:00UTCCOMMENT
> 2008 1 22 1.201871782541D-06 CORR TO
> SYSTEM TIME
> 14 LEAP SECONDS
> END OF HEADER
>
> Thanks.
More information about the teqc
mailing list