[teqc] Leica Measurement Engine version in teqc generated rinex file

[Uwe Hessels]

Dear Lou,

when rinexing Leica mdb files with teqc, the version of the measurement engine, as part of
the firmware, is not included in the final rinex file.

Is it possible to include the version of the measurement engine when rinexing with teqc?

If not yet, perhaps in the next version?
(of course only when the version of the measurement engine is included in the mdb file)


example with the version of the measurement engine:
355315              LEICA GRX1200GGPRO  7.53/3.018          REC # / TYPE / VERS

example without the version of the measurement engine:
355315              LEICA GRX1200GGPRO  7.53                REC # / TYPE / VERS

-- 
Mit freundlichen Gruessen / Best regards, Uwe Hessels
_________________________________________________
  Dipl.Ing. Uwe Hessels
  Bundesamt fuer Kartographie und Geodaesie /
  Federal Agency for Cartography and Geodesy
  Geodätisches Observatorium Wettzell       /
  Geodetic Observatory Wettzell
  GNSS group
  Sackenrieder Str. 25
  D - 93444 Bad Koetzting / Germany

  Phone:           +49 (0) 9941 / 603-208
  FAX:             +49 (0) 9941 / 603-222
  switchboard      +49 (0) 9941 / 603-0
  e-mail (office)  uwe.hessels at bkg.bund.de
  e-mail (altern.) hessels at fs.wettzell.de
  URL              http://www.fs.wettzell.de
_________________________________________________