[teqc] batch file for teqc on windows

[Lou Estey]

Randy Tompkins wrote:
> Hi Brad,
> 
> I have tried the trimble convert to rinex program.  I use trimble 4800 
> receivers for base stations when I rtk and collect a static session on 
> the base on every session.  Some time ago, 6 months to a year, maybe 
> more, when I submitted the raw trimble .dat files to OPUS, OPUS would 
> reject them with a message like:
> 
> FILE: 91440605.DAT 000070715
>  
>  9011   OPUS could not process the data file that was submitted.  The data was
>  9011   either very noisy or it was collected in kinematic mode.
>  9011
> 
> The only difference I know I made on my end was an upgrade in the 
> receiver firmware, but can not for sure pinpoint this is the issue.  
> Trimble tech support can not figure out the problem and OPUS says the 
> problem is not on their end.  If I use the trimble convert to rinex 
> program, it carries through the conversion the error and I get the same 
> error when I submit the converted rinex file.
>  
> The guy from trimble and I worked out the work-around using the method of :
>  
> teqc -O.obs L1+L2+C1 trimble4800file.dat > trimble4800file.o10
>  
> thanks
>  
> Randy L. Tompkins

Maybe we can get someone at NGS familiar with OPUS to explain this.
What's the difference between submitting at a .dat, converting that
that .dat to RINEX with Trimble's `dat2rin`, and converting the .dat
to RINEX with teqc?  It's the same data ... so the OPUS message must
be wrong, or at least is very misleading.

--lou

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Louis H. Estey, Ph.D.              office:  [+001] 303-381-7456
UNAVCO, 6350 Nautilus Drive           FAX:  [+001] 303-381-7451
Boulder, CO  80301-5554            e-mail:  lou  unavco.org
      WWW:  http://www.unavco.org   http://jules.unavco.org

"If the universe is the answer, what is the question?"
                                                -- Leon Lederman
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~