[teqc] ubx to rinex problem

[Sam Storm van Leeuwen]

Download u-Center from the u-Blox site (www.u-blox.ch) and switch off all 
messages which
you don't need !

Cheers,

Sam

At 01:25 PM 4/18/2010 +0200, you wrote:
>Hi,
>
>I have an ubx file that needs to be changed to a rinex obs and a nav file.
>but teqc kept giving me a long list of "ublox message class/id __________ 
>unknown or not coded yet ... skipping"
>The unknown codes included 0x0a04, 0x0613, 0x0606, 0x0502, 0x060e, 0x0602, 
>0x0601, 0x0500, 0x0611, 0x0616, 0x0619, 0x061d, 0x0607, 0x061b, 0x0608, 
>0x0617, 0x061a.
>Honestly, my resultant obs and nav files look good...
>but i'm wondering if there will be any problems skipping these codes.
>
>Thank you very much for the help!
>
>Osmium Leung

Sam Storm van Leeuwen                       e-mail: samsvl at nlr.nl
National Aerospace Laboratory NLR       web: http://www.nlr.nl
POBox 90502, 1006BM Amsterdam       phone: +31 20 511 3562
Netherlands                                          fax: +31 20 511 3210



*******************************************************************************************************
The NLR disclaimer (http://www.nlr.nl/emaildisclaimer) is valid for NLR e-mail messages.
*******************************************************************************************************