[teqc] helpful tip of week 1967

Lou Estey lou at unavco.org
Wed Sep 20 06:46:23 MDT 2017


This week's tip: the strange position from '+meta'

The '+meta' option, to obtain metadata from a raw or RINEX file, was covered in
'tip of week 1928', https://postal.unavco.org/pipermail/teqc/2016/002206.html.

Sometimes, probably more common with a raw data file than a RINEX obs file, the
position that teqc returns (as of version 2017Sep7) with the '+meta' option might be:

antenna latitude (deg):      90.000000
antenna longitude (deg):      0.000000
antenna elevation (m):   -6356752.3142

What does this set of values mean?

It's pretty straightforward:  If you are at a point +90 degrees latitude and any
longitude, you are at the north pole.  Of course since teqc uses the WGS84 coordinates,
the geographic position here is for the north pole on the WGS84 ellipsoid.  And if
you go straight down 6356752.3142 meters (= semi-minor axis of the WGS84 ellipsoid
to the nearest 0.1 mm), you are at the center of the Earth, or, more precisely in
this instance, at the WGS84 cartesian XYZ position of 0 0 0 meters.  So the above
set of values merely means "no known position", since an XYZ of 0 0 0 is teqc's
initialized position when starting any process.

(Note: prior to version 2017Sep7 you'll instead see the last line be:
antenna elevation (m):   -6378137.000
... incorrectly having -a instead of -b of WGS84.  I only noticed this annoying
little mistake after 20 years while writing a draft for this 'tip' a few weeks ago.)

And, of course, a latitude of -90 degrees, or the south pole, could also have been
used.  Or 0 degrees latitude (the equator) at any longitude with an elevation of
-6378137.0000 (= semi-major axis of the WGS84 ellipsoid).  It would all mean the
same thing: an XYZ of 0 0 0.

At any rate, this result from '+meta' means that there was no recorded metadata found
in the input that indicated the antenna position.  Simple as that.

Happy teqc-ing!

cheers,
--lou

p.s. There will be a break in 'tips of the week' until GPS week 1972.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Louis H. Estey, Ph.D.              office:  [+001] 303-381-7456
UNAVCO, 6350 Nautilus Drive           FAX:  [+001] 303-381-7451
Boulder, CO  80301-5554            e-mail:  lou  unavco.org

"If the universe is the answer, what is the question?"
                                                -- Leon Lederman
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Past helpful tips:

week 1894: using teqc config files - http://postal.unavco.org/pipermail/teqc/2016/002067.html
week 1895: qc of high-rate data - http://postal.unavco.org/pipermail/teqc/2016/002071.html
week 1896: UNIX/Linux shells for Windows - http://postal.unavco.org/pipermail/teqc/2016/002072.html
week 1897: '-' vs. '+' teqc options - http://postal.unavco.org/pipermail/teqc/2016/002076.html
week 1898: auto-identification of formats - http://postal.unavco.org/pipermail/teqc/2016/002092.html
week 1899: auto-identification vs. format flags - http://postal.unavco.org/pipermail/teqc/2016/002096.html
week 1900: square brackets in options - http://postal.unavco.org/pipermail/teqc/2016/002105.html
week 1901: using option '+mds' - http://postal.unavco.org/pipermail/teqc/2016/002108.html
week 1902: qc results w/ problematic nav messages - http://postal.unavco.org/pipermail/teqc/2016/002113.html
week 1903: '-no_orb[it]' and '-no_pos[ition]' options - http://postal.unavco.org/pipermail/teqc/2016/002115.html
week 1904: '-week' option - http://postal.unavco.org/pipermail/teqc/2016/002117.html
week 1905: using '+bcf' for XYZ/geodetic conversion - http://postal.unavco.org/pipermail/teqc/2016/002126.html
week 1906: the '+v[erify]' option - http://postal.unavco.org/pipermail/teqc/2016/002128.html
week 1907: '+C2', '+L5', "+L6', '+L7', '+L8', '+all' options - http://postal.unavco.org/pipermail/teqc/2016/002130.html
week 1908: getting RINEX doppler and L2 - http://postal.unavco.org/pipermail/teqc/2016/002131.html
week 1909: using paths w/ file names - http://postal.unavco.org/pipermail/teqc/2016/002132.html
week 1910: the (un)importance of file names - http://postal.unavco.org/pipermail/teqc/2016/002133.html
week 1911: notices, warnings, and errors - http://postal.unavco.org/pipermail/teqc/2016/002134.html
week 1912: the '-max_rx_SVs' option - http://postal.unavco.org/pipermail/teqc/2016/002137.html
week 1913: the end of '++igs' and '+igs' - http://postal.unavco.org/pipermail/teqc/2016/002140.html
week 1914: splicing together RINEX files - http://postal.unavco.org/pipermail/teqc/2016/002144.html
week 1915: using '-O.int' and '-O.dec' - http://postal.unavco.org/pipermail/teqc/2016/002145.html
week 1916: '+doy' option - http://postal.unavco.org/pipermail/teqc/2016/002146.html
week 1917: '-tbin' and '-ast' options - http://postal.unavco.org/pipermail/teqc/2016/002152.html
week 1918: mp12 RMS before/after Oct 2013 - http://postal.unavco.org/pipermail/teqc/2016/002158.html
week 1919: the global windowing options - http://postal.unavco.org/pipermail/teqc/2016/002159.html
week 1920: '-M.dec' and '-N.dec' options - http://postal.unavco.org/pipermail/teqc/2016/002163.html
week 1921: combining time filtering options - http://postal.unavco.org/pipermail/teqc/2016/002176.html
week 1922: helping me (or someone else on the list) help you - http://postal.unavco.org/pipermail/teqc/2016/002187.html
week 1923: the "build" line - http://postal.unavco.org/pipermail/teqc/2016/002190.html
week 1924: the qc '-w[idth]' option - http://postal.unavco.org/pipermail/teqc/2016/002193.html
week 1925: qc with explicit time windowing - http://postal.unavco.org/pipermail/teqc/2016/002194.html
week 1926: the '+rx_state' option - http://postal.unavco.org/pipermail/teqc/2016/002200.html
week 1927: the '-O.sum' option - http://postal.unavco.org/pipermail/teqc/2016/002204.html
week 1928: the '+meta' and '+mds' options - http://postal.unavco.org/pipermail/teqc/2016/002206.html
week 1930: more on '-O.sum' - http://postal.unavco.org/pipermail/teqc/2017/002207.html
week 1931: the '-O.s[ystem]' option - http://postal.unavco.org/pipermail/teqc/2017/002208.html
week 1932: leap seconds - http://postal.unavco.org/pipermail/teqc/2017/002215.html
week 1936: what you can (and shouldn't) do in a RINEX obs file - http://postal.unavco.org/pipermail/teqc/2017/002229.html
week 1938: the '+psp' option - http://postal.unavco.org/pipermail/teqc/2017/002231.html
week 1939: the '+diag' option - http://postal.unavco.org/pipermail/teqc/2017/002235.html
week 1951: '-n_<system>' and SV filtering options - http://postal.unavco.org/pipermail/teqc/2017/002277.html
week 1953: more with '+diag' option - http://postal.unavco.org/pipermail/teqc/2017/002287.html
week 1954: using '+diag' output to split raw files - http://postal.unavco.org/pipermail/teqc/2017/002290.html
week 1955: current qc notation - http://postal.unavco.org/pipermail/teqc/2017/002302.html
week 1956: the '+qcq' option - http://postal.unavco.org/pipermail/teqc/2017/002304.html
week 1957: using Trimble formats - http://postal.unavco.org/pipermail/teqc/2017/002305.html
week 1958: ToC != ToE messages - http://postal.unavco.org/pipermail/teqc/2017/002310.html
week 1959: receivers vs. formats - http://postal.unavco.org/pipermail/teqc/2017/002311.html
week 1960: when the '-week' option is very wrong to use - https://postal.unavco.org/pipermail/teqc/2017/002314.html
week 1961: "less" is usually best - https://postal.unavco.org/pipermail/teqc/2017/002315.html
week 1962: using GPS L2C with teqc - https://postal.unavco.org/pipermail/teqc/2017/002316.html
week 1964: the '+eds' options - https://postal.unavco.org/pipermail/teqc/2017/002317.html
week 1965: handling RINEX comment lines - https://postal.unavco.org/pipermail/teqc/2017/002324.html
week 1966: the '+dUTC_p' options - https://postal.unavco.org/pipermail/teqc/2017/002331.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://postal.unavco.org/pipermail/teqc/attachments/20170920/f5060cbb/attachment.html>


More information about the teqc mailing list