[teqc] helpful tip of week 1984

Lou Estey lou at unavco.org
Thu Jan 18 12:09:55 MST 2018


This week's tip: requirements for multiple input target files or stdin

At this point, as a teqc user, you should be familiar enough with teqc to know that
the general syntax of teqc (when not reading stdin as input) is:

      teqc {all options} {all target filenames}

i.e. all options must proceed the list of all target filenames, and, in other words, the
one or more target files are what you want teqc to operate on for translation, editing,
or quality checking (qc).  But when there are multiple target files in one command,
there are some general requirements:

1) All the target files must have the same format, e.g. all RINEX obs, or all GPS RINEX
nav, or all Leica MDB, or all Septentrio Binary Format, and so on.  (If you have not
supplied an option to specify the format of the target files, teqc's auto-identification
will use the first file listed to determine the format; see related tips of the week
https://postal.unavco.org/pipermail/teqc/2016/002092.html and
https://postal.unavco.org/pipermail/teqc/2016/002096.html.)

2) All the target files need to be ordered in time sequential order (*).

3) If doing a qc or splicing, all the target files need to have data from the same
equipment (and receiver firmware).  However, the data could be for a moving antenna.
(An exception exists for splicing navigation files; then there's no way for teqc to
know if the input is from different sites or if a change in equipment at one site
occurred.)

* Note 1: The time-sequential order requirement do not apply to the '+v', '+meta', '+mds',
and '-O.sum' options (**).

** Note 2: Except for '-O.sum e' -- a very special case -- which writes to the end of a
RINEX obs file, and when using this option, the time-sequential order requirement
is in effect.  (See tip of the week https://postal.unavco.org/pipermail/teqc/2016/002204.html
for more on the 'O.sum' options.)

-------

When reading stdin as input, the syntax of teqc is

<some process> | teqc {all options, including specifying format of stdin}

In this case, the requirements are similar:

1) All of stdin must be of the same format, and this format must be specified as
part of teqc's option list.

2) All the records or messages of stdin need to be ordered in time sequential order (***).

3) All the records or messages of stdin need to have data from the same equipment (and
receiver firmware); again, the data could be for a moving antenna.

*** Note 3: You probably aren't going to be using the '+v', '+meta', '+mds', or '-O.sum'
options when reading stdin.  (You could try them, but nothing is going to happen until
the process piping to teqc terminates, and the results may be unpredictable.)

Happy teqc-ing!

cheers,
--lou

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Louis H. Estey, Ph.D.              office:  [+001] 303-381-7456
UNAVCO, 6350 Nautilus Drive           FAX:  [+001] 303-381-7451
Boulder, CO  80301-5554            e-mail:  lou  unavco.org

"If the universe is the answer, what is the question?"
                                                -- Leon Lederman
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Past helpful tips:

week 1894: using teqc config files - http://postal.unavco.org/pipermail/teqc/2016/002067.html
week 1895: qc of high-rate data - http://postal.unavco.org/pipermail/teqc/2016/002071.html
week 1896: UNIX/Linux shells for Windows - http://postal.unavco.org/pipermail/teqc/2016/002072.html
week 1897: '-' vs. '+' teqc options - http://postal.unavco.org/pipermail/teqc/2016/002076.html
week 1898: auto-identification of formats - http://postal.unavco.org/pipermail/teqc/2016/002092.html
week 1899: auto-identification vs. format flags - http://postal.unavco.org/pipermail/teqc/2016/002096.html
week 1900: square brackets in options - http://postal.unavco.org/pipermail/teqc/2016/002105.html
week 1901: using option '+mds' - http://postal.unavco.org/pipermail/teqc/2016/002108.html
week 1902: qc results w/ problematic nav messages - http://postal.unavco.org/pipermail/teqc/2016/002113.html
week 1903: '-no_orb[it]' and '-no_pos[ition]' options - http://postal.unavco.org/pipermail/teqc/2016/002115.html
week 1904: '-week' option - http://postal.unavco.org/pipermail/teqc/2016/002117.html
week 1905: using '+bcf' for XYZ/geodetic conversion - http://postal.unavco.org/pipermail/teqc/2016/002126.html
week 1906: the '+v[erify]' option - http://postal.unavco.org/pipermail/teqc/2016/002128.html
week 1907: '+C2', '+L5', "+L6', '+L7', '+L8', '+all' options - http://postal.unavco.org/pipermail/teqc/2016/002130.html
week 1908: getting RINEX doppler and L2 - http://postal.unavco.org/pipermail/teqc/2016/002131.html
week 1909: using paths w/ file names - http://postal.unavco.org/pipermail/teqc/2016/002132.html
week 1910: the (un)importance of file names - http://postal.unavco.org/pipermail/teqc/2016/002133.html
week 1911: notices, warnings, and errors - http://postal.unavco.org/pipermail/teqc/2016/002134.html
week 1912: the '-max_rx_SVs' option - http://postal.unavco.org/pipermail/teqc/2016/002137.html
week 1913: the end of '++igs' and '+igs' - http://postal.unavco.org/pipermail/teqc/2016/002140.html
week 1914: splicing together RINEX files - http://postal.unavco.org/pipermail/teqc/2016/002144.html
week 1915: using '-O.int' and '-O.dec' - http://postal.unavco.org/pipermail/teqc/2016/002145.html
week 1916: '+doy' option - http://postal.unavco.org/pipermail/teqc/2016/002146.html
week 1917: '-tbin' and '-ast' options - http://postal.unavco.org/pipermail/teqc/2016/002152.html
week 1918: mp12 RMS before/after Oct 2013 - http://postal.unavco.org/pipermail/teqc/2016/002158.html
week 1919: the global windowing options - http://postal.unavco.org/pipermail/teqc/2016/002159.html
week 1920: '-M.dec' and '-N.dec' options - http://postal.unavco.org/pipermail/teqc/2016/002163.html
week 1921: combining time filtering options - http://postal.unavco.org/pipermail/teqc/2016/002176.html
week 1922: helping me (or someone else on the list) help you - http://postal.unavco.org/pipermail/teqc/2016/002187.html
week 1923: the "build" line - http://postal.unavco.org/pipermail/teqc/2016/002190.html
week 1924: the qc '-w[idth]' option - http://postal.unavco.org/pipermail/teqc/2016/002193.html
week 1925: qc with explicit time windowing - http://postal.unavco.org/pipermail/teqc/2016/002194.html
week 1926: the '+rx_state' option - http://postal.unavco.org/pipermail/teqc/2016/002200.html
week 1927: the '-O.sum' option - http://postal.unavco.org/pipermail/teqc/2016/002204.html
week 1928: the '+meta' and '+mds' options - http://postal.unavco.org/pipermail/teqc/2016/002206.html
week 1930: more on '-O.sum' - http://postal.unavco.org/pipermail/teqc/2017/002207.html
week 1931: the '-O.s[ystem]' option - http://postal.unavco.org/pipermail/teqc/2017/002208.html
week 1932: leap seconds - http://postal.unavco.org/pipermail/teqc/2017/002215.html
week 1936: what you can (and shouldn't) do in a RINEX obs file - http://postal.unavco.org/pipermail/teqc/2017/002229.html
week 1938: the '+psp' option - http://postal.unavco.org/pipermail/teqc/2017/002231.html
week 1939: the '+diag' option - http://postal.unavco.org/pipermail/teqc/2017/002235.html
week 1951: '-n_<system>' and SV filtering options - http://postal.unavco.org/pipermail/teqc/2017/002277.html
week 1953: more with '+diag' option - http://postal.unavco.org/pipermail/teqc/2017/002287.html
week 1954: using '+diag' output to split raw files - http://postal.unavco.org/pipermail/teqc/2017/002290.html
week 1955: current qc notation - http://postal.unavco.org/pipermail/teqc/2017/002302.html
week 1956: the '+qcq' option - http://postal.unavco.org/pipermail/teqc/2017/002304.html
week 1957: using Trimble formats - http://postal.unavco.org/pipermail/teqc/2017/002305.html
week 1958: ToC != ToE messages - http://postal.unavco.org/pipermail/teqc/2017/002310.html
week 1959: receivers vs. formats - http://postal.unavco.org/pipermail/teqc/2017/002311.html
week 1960: when the '-week' option is very wrong to use - https://postal.unavco.org/pipermail/teqc/2017/002314.html
week 1961: "less" is usually best - https://postal.unavco.org/pipermail/teqc/2017/002315.html
week 1962: using GPS L2C with teqc - https://postal.unavco.org/pipermail/teqc/2017/002316.html
week 1964: the '+eds' options - https://postal.unavco.org/pipermail/teqc/2017/002317.html
week 1965: handling RINEX comment lines - https://postal.unavco.org/pipermail/teqc/2017/002324.html
week 1966: the '+dUTC_p' options - https://postal.unavco.org/pipermail/teqc/2017/002331.html
week 1967: the strange position from '+meta' - https://postal.unavco.org/pipermail/teqc/2017/002355.html
week 1972: what shows up as metadata in RINEX headers - https://postal.unavco.org/pipermail/teqc/2017/002362.html
week 1973: GPS L2C navigation messages - https://postal.unavco.org/pipermail/teqc/2017/002363.html
week 1974: the '+ion_p' options - https://postal.unavco.org/pipermail/teqc/2017/002370.html
week 1975: the '+event' options - https://postal.unavco.org/pipermail/teqc/2017/002372.html
week 1976: options '+smtt' (default) vs. '-smtt' - https://postal.unavco.org/pipermail/teqc/2017/002374.html
week 1977: the reported interval with '+meta' for a RINEX obs file - https://postal.unavco.org/pipermail/teqc/2017/002377.html
week 1978: the '-N.dUTC' options - https://postal.unavco.org/pipermail/teqc/2017/002378.html
week 1979: the various qc elevation angles - https://postal.unavco.org/pipermail/teqc/2017/002383.html
week 1980: avoid in RINEX: Transit data - https://postal.unavco.org/pipermail/teqc/2017/002385.html
week 1981: avoid in RINEX: epoch flag = 6 - https://postal.unavco.org/pipermail/teqc/2017/002389.html
week 1982: avoid in RINEX: RCV CLOCK OFFS APPL = 1 - https://postal.unavco.org/pipermail/teqc/2018/002392.html
week 1983: don't count on in RINEX: receiver clock offset per epoch - https://postal.unavco.org/pipermail/teqc/2018/002393.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://postal.unavco.org/pipermail/teqc/attachments/20180118/926eaab5/attachment-0001.html>


More information about the teqc mailing list