[teqc] helpful tip of week 1987

Lou Estey lou at unavco.org
Wed Feb 7 08:05:12 MST 2018


This week's tip: the 'O.px and 'O.pg' options

This is a useful set of options that was expanded from the original usage which was
only for RINEX observation header editing:

    '-O.px[WGS84xyz,m] x y z'  to set RINEX OBS header antenna WGS 84 position to x y z (meters)
    '-O.pg[eo,ddm] lat lon el' to set RINEX OBS header antenna WGS 84 position to lat lon elevation (deg deg meters)

You've probably noticed that the RINEX observation header line APPROX POSITION XYZ
is in Cartesian WGS-84 XYZ coordinates, so if you use '-O.pg ...' then the supplied
geographic coordinates are assumed to be in WGS-84 and converted into XYZ for the
header.  (The conversion is done with the same code as used in teqc, as discussed in this
earlier tip of the week: https://postal.unavco.org/pipermail/teqc/2016/002126.html)

In Oct 2015, by flipping the sign of these two options, these were expanded for a
special use-case during qc:

    '+O.px[WGS84xyz,m] x y z'  same as -O.px[WGS84xyz,m], but also fixes antenna position for qc
    '+O.pg[eo,ddm] lat lon el' same as -O.pg[eo,ddm], but also fixes antenna position for qc

In other words, with '+' version of the options you are fixing the antenna position
for the qc and teqc will use the supplied location when it is computing SV elevation
and azimuth, etc.  (Just to make this 100% clear, teqc will _not_ be computing the
antenna position itself when either '+O.px ...' or '+O.pg ...' are used.)

You can also use the minus-sign '-O.px ...' or '-O.pg ...' forms during qc, so it's
important to understand the difference during qc:

   '-O.px ...' or '-O.pg ...' just changes the antenna position against which the independently
       determined qc antenna position (done by teqc) will be compared at the end of the qc

   '+O.px ...' or '+O.pg ...' fixes the antenna position at the specified point and
       there will be no independently determined qc antenna position done by teqc

In May 2017, another special syntax for qc was introduced:

    '+O.px[WGS84xyz,m] -'      use fixed antenna position for qc found in metadata
    '+O.pg[eo,ddm] -'          use fixed antenna position for qc found in metadata

In other words, the argument for '+O.px ...' or '+O.pg ...' is just the dash, '-',
character.  That's all.  No numerical values.  If you are qc-ing RINEX obs (the normal
situation), then the value read from the header line APPROX POSITION XYZ is what's used.
Essentially this syntax is just a short-cut so that you don't have to fiddle around
getting the XYZ values from the header, etc.  Teqc does all that for you.

However, just be sure you really trust the metadata position of the antenna during qc
if using either '+O.px ...' or '+O.pg ...', because teqc isn't going to be checking the
supplied antenna position at all.

Happy teqc-ing!

cheers,
--lou

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Louis H. Estey, Ph.D.              office:  [+001] 303-381-7456
UNAVCO, 6350 Nautilus Drive           FAX:  [+001] 303-381-7451
Boulder, CO  80301-5554            e-mail:  lou  unavco.org

"If the universe is the answer, what is the question?"
                                                -- Leon Lederman
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Past helpful tips:

week 1894: using teqc config files - http://postal.unavco.org/pipermail/teqc/2016/002067.html
week 1895: qc of high-rate data - http://postal.unavco.org/pipermail/teqc/2016/002071.html
week 1896: UNIX/Linux shells for Windows - http://postal.unavco.org/pipermail/teqc/2016/002072.html
week 1897: '-' vs. '+' teqc options - http://postal.unavco.org/pipermail/teqc/2016/002076.html
week 1898: auto-identification of formats - http://postal.unavco.org/pipermail/teqc/2016/002092.html
week 1899: auto-identification vs. format flags - http://postal.unavco.org/pipermail/teqc/2016/002096.html
week 1900: square brackets in options - http://postal.unavco.org/pipermail/teqc/2016/002105.html
week 1901: using option '+mds' - http://postal.unavco.org/pipermail/teqc/2016/002108.html
week 1902: qc results w/ problematic nav messages - http://postal.unavco.org/pipermail/teqc/2016/002113.html
week 1903: '-no_orb[it]' and '-no_pos[ition]' options - http://postal.unavco.org/pipermail/teqc/2016/002115.html
week 1904: '-week' option - http://postal.unavco.org/pipermail/teqc/2016/002117.html
week 1905: using '+bcf' for XYZ/geodetic conversion - http://postal.unavco.org/pipermail/teqc/2016/002126.html
week 1906: the '+v[erify]' option - http://postal.unavco.org/pipermail/teqc/2016/002128.html
week 1907: '+C2', '+L5', "+L6', '+L7', '+L8', '+all' options - http://postal.unavco.org/pipermail/teqc/2016/002130.html
week 1908: getting RINEX doppler and L2 - http://postal.unavco.org/pipermail/teqc/2016/002131.html
week 1909: using paths w/ file names - http://postal.unavco.org/pipermail/teqc/2016/002132.html
week 1910: the (un)importance of file names - http://postal.unavco.org/pipermail/teqc/2016/002133.html
week 1911: notices, warnings, and errors - http://postal.unavco.org/pipermail/teqc/2016/002134.html
week 1912: the '-max_rx_SVs' option - http://postal.unavco.org/pipermail/teqc/2016/002137.html
week 1913: the end of '++igs' and '+igs' - http://postal.unavco.org/pipermail/teqc/2016/002140.html
week 1914: splicing together RINEX files - http://postal.unavco.org/pipermail/teqc/2016/002144.html
week 1915: using '-O.int' and '-O.dec' - http://postal.unavco.org/pipermail/teqc/2016/002145.html
week 1916: '+doy' option - http://postal.unavco.org/pipermail/teqc/2016/002146.html
week 1917: '-tbin' and '-ast' options - http://postal.unavco.org/pipermail/teqc/2016/002152.html
week 1918: mp12 RMS before/after Oct 2013 - http://postal.unavco.org/pipermail/teqc/2016/002158.html
week 1919: the global windowing options - http://postal.unavco.org/pipermail/teqc/2016/002159.html
week 1920: '-M.dec' and '-N.dec' options - http://postal.unavco.org/pipermail/teqc/2016/002163.html
week 1921: combining time filtering options - http://postal.unavco.org/pipermail/teqc/2016/002176.html
week 1922: helping me (or someone else on the list) help you - http://postal.unavco.org/pipermail/teqc/2016/002187.html
week 1923: the "build" line - http://postal.unavco.org/pipermail/teqc/2016/002190.html
week 1924: the qc '-w[idth]' option - http://postal.unavco.org/pipermail/teqc/2016/002193.html
week 1925: qc with explicit time windowing - http://postal.unavco.org/pipermail/teqc/2016/002194.html
week 1926: the '+rx_state' option - http://postal.unavco.org/pipermail/teqc/2016/002200.html
week 1927: the '-O.sum' option - http://postal.unavco.org/pipermail/teqc/2016/002204.html
week 1928: the '+meta' and '+mds' options - http://postal.unavco.org/pipermail/teqc/2016/002206.html
week 1930: more on '-O.sum' - http://postal.unavco.org/pipermail/teqc/2017/002207.html
week 1931: the '-O.s[ystem]' option - http://postal.unavco.org/pipermail/teqc/2017/002208.html
week 1932: leap seconds - http://postal.unavco.org/pipermail/teqc/2017/002215.html
week 1936: what you can (and shouldn't) do in a RINEX obs file - http://postal.unavco.org/pipermail/teqc/2017/002229.html
week 1938: the '+psp' option - http://postal.unavco.org/pipermail/teqc/2017/002231.html
week 1939: the '+diag' option - http://postal.unavco.org/pipermail/teqc/2017/002235.html
week 1951: '-n_<system>' and SV filtering options - http://postal.unavco.org/pipermail/teqc/2017/002277.html
week 1953: more with '+diag' option - http://postal.unavco.org/pipermail/teqc/2017/002287.html
week 1954: using '+diag' output to split raw files - http://postal.unavco.org/pipermail/teqc/2017/002290.html
week 1955: current qc notation - http://postal.unavco.org/pipermail/teqc/2017/002302.html
week 1956: the '+qcq' option - http://postal.unavco.org/pipermail/teqc/2017/002304.html
week 1957: using Trimble formats - http://postal.unavco.org/pipermail/teqc/2017/002305.html
week 1958: ToC != ToE messages - http://postal.unavco.org/pipermail/teqc/2017/002310.html
week 1959: receivers vs. formats - http://postal.unavco.org/pipermail/teqc/2017/002311.html
week 1960: when the '-week' option is very wrong to use - https://postal.unavco.org/pipermail/teqc/2017/002314.html
week 1961: "less" is usually best - https://postal.unavco.org/pipermail/teqc/2017/002315.html
week 1962: using GPS L2C with teqc - https://postal.unavco.org/pipermail/teqc/2017/002316.html
week 1964: the '+eds' options - https://postal.unavco.org/pipermail/teqc/2017/002317.html
week 1965: handling RINEX comment lines - https://postal.unavco.org/pipermail/teqc/2017/002324.html
week 1966: the '+dUTC_p' options - https://postal.unavco.org/pipermail/teqc/2017/002331.html
week 1967: the strange position from '+meta' - https://postal.unavco.org/pipermail/teqc/2017/002355.html
week 1972: what shows up as metadata in RINEX headers - https://postal.unavco.org/pipermail/teqc/2017/002362.html
week 1973: GPS L2C navigation messages - https://postal.unavco.org/pipermail/teqc/2017/002363.html
week 1974: the '+ion_p' options - https://postal.unavco.org/pipermail/teqc/2017/002370.html
week 1975: the '+event' options - https://postal.unavco.org/pipermail/teqc/2017/002372.html
week 1976: options '+smtt' (default) vs. '-smtt' - https://postal.unavco.org/pipermail/teqc/2017/002374.html
week 1977: the reported interval with '+meta' for a RINEX obs file - https://postal.unavco.org/pipermail/teqc/2017/002377.html
week 1978: the '-N.dUTC' options - https://postal.unavco.org/pipermail/teqc/2017/002378.html
week 1979: the various qc elevation angles - https://postal.unavco.org/pipermail/teqc/2017/002383.html
week 1980: avoid in RINEX: Transit data - https://postal.unavco.org/pipermail/teqc/2017/002385.html
week 1981: avoid in RINEX: epoch flag = 6 - https://postal.unavco.org/pipermail/teqc/2017/002389.html
week 1982: avoid in RINEX: RCV CLOCK OFFS APPL = 1 - https://postal.unavco.org/pipermail/teqc/2018/002392.html
week 1983: don't count on in RINEX: receiver clock offset per epoch - https://postal.unavco.org/pipermail/teqc/2018/002393.html
week 1984: requirements for multiple target files/stdin - https://postal.unavco.org/pipermail/teqc/2018/002410.html
week 1985: default output for various input - https://postal.unavco.org/pipermail/teqc/2018/002412.html
week 1986: the '+latency' options - https://postal.unavco.org/pipermail/teqc/2018/002419.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://postal.unavco.org/pipermail/teqc/attachments/20180207/c5fe9e12/attachment-0001.html>


More information about the teqc mailing list