[teqc] Trimble RTX and teqc

John Hamilton hamilton at terrasurv.com
Wed Feb 21 12:15:40 MST 2018


Lou: I am not familiar with the usage of the -O.sum, what is the exact
command line I should use (windows)? I ran it as teqc -O.sum
42400511.18o>42400511.sum thinking I would get the output sent to that file
but it creates two 0 byte files, the original .18o and the .sum. So
obviously I am not entering the command line string correctly. I could send
you an hourly file from each translator if that would help.

On Wed, Feb 21, 2018 at 12:15 PM, Lou Estey <lou at unavco.org> wrote:

> hi John,
>
> The response from Trimble's RTX support is basically void of information
> (since they
> are not familiar with teqc and their response is pure speculation), so I
> suggest
> first getting some real preliminary information:
>
> On both the teqc-produced and Trimble utility-produced RINEX, run teqc
> with the
> '-O.sum .' option and at least see which SVs and observables are in each
> RINEX
> file.  (See https://postal.unavco.org/pipermail/teqc/2016/002204.html.)
>
> Also, which options are you using with teqc to translate to the RINEX that
> Trimble's RTX service?
>
> --lou
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Louis H. Estey, Ph.D.              office:  [+001] 303-381-7456
> UNAVCO, 6350 Nautilus Drive
> <https://maps.google.com/?q=6350+Nautilus+Drive&entry=gmail&source=g>
>        FAX:  [+001] 303-381-7451
> Boulder, CO  80301-5554            e-mail:  lou  unavco.org
>
> "If the universe is the answer, what is the question?"
>                                                 - Leon Lederman
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
> On 2018 Feb 21, 8:18 AM, John Hamilton wrote:
>
>> If I convert a data file from a Trimble receiver (R10) using teqc and
>> send it to the Trimble RTX service (PPP), it only uses the GPS satellites,
>> and ignores the other constellations. But, if I convert to rinex using
>> the trimble utility, it processes all of the constellations. So, I
>> contacted RTX support, and here is the response I got back...
>>
>> I think the issue lies with using the teqc converter to convert your
>> files to RINEX – I’m not intimately familiar with this tool, but perhaps
>> there is a misconfiguration, or the RINEX file being generated is not
>> standard.
>>
>> I always use teqc because I thought it would the the "most standard".
>>
>>
>>
>> --
>> John Hamilton, PA PLS
>> Terrasurv, Inc
>> Pittsburgh, PA
>> Voice: +1-412-341-5620
>> Fax: +1-412-535-5185
>> File Transfer: terrasurv.wetransfer.com <http://terrasurv.wetransfer.com>
>>
>


-- 
John Hamilton, PA PLS
Terrasurv, Inc
Pittsburgh, PA
Voice: +1-412-341-5620
Fax: +1-412-535-5185
File Transfer: terrasurv.wetransfer.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://postal.unavco.org/pipermail/teqc/attachments/20180221/5c40dff0/attachment.html>


More information about the teqc mailing list