[teqc] Trimble RTX and teqc

Lou Estey lou at unavco.org
Wed Feb 21 12:28:49 MST 2018


The -O.sum option takes a single argument, specifying where the output is to go
(as explained in https://postal.unavco.org/pipermail/teqc/2016/002204.html). So
you want to execute:

teqc -O.sum . 42400511.18o > 42400511.sum
             ^
        note the dot!

(The '.' specifies the output is to go to stdout, which the shell then sends
to the file 42400511.sum.)  Another way to do the same thing:

teqc -O.sum 42400511.sum 42400511.18o

where here you are specifying directly to teqc that the -O.sum output is to
go to a file named 42400511.sum.

--lou

On 2018 Feb 21, 12:15 PM, John Hamilton wrote:
> Lou: I am not familiar with the usage of the -O.sum, what is the exact command line I should use (windows)? I ran it as teqc -O.sum
> 42400511.18o>42400511.sum thinking I would get the output sent to that file but it creates two 0 byte files, the original .18o and the .sum. So
> obviously I am not entering the command line string correctly. I could send you an hourly file from each translator if that would help.
>
> On Wed, Feb 21, 2018 at 12:15 PM, Lou Estey <lou at unavco.org <mailto:lou at unavco.org>> wrote:
>
>     hi John,
>
>     The response from Trimble's RTX support is basically void of information (since they
>     are not familiar with teqc and their response is pure speculation), so I suggest
>     first getting some real preliminary information:
>
>     On both the teqc-produced and Trimble utility-produced RINEX, run teqc with the
>     '-O.sum .' option and at least see which SVs and observables are in each RINEX
>     file.  (See https://postal.unavco.org/pipermail/teqc/2016/002204.html <https://postal.unavco.org/pipermail/teqc/2016/002204.html>.)
>
>     Also, which options are you using with teqc to translate to the RINEX that
>     Trimble's RTX service?
>
>     --lou
>
>     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>     Louis H. Estey, Ph.D.              office:  [+001] 303-381-7456
>     UNAVCO, 6350 Nautilus Drive <https://maps.google.com/?q=6350+Nautilus+Drive&entry=gmail&source=g>           FAX:  [+001] 303-381-7451
>     Boulder, CO  80301-5554            e-mail:  lou unavco.org <http://unavco.org>
>
>     "If the universe is the answer, what is the question?"
>                                                      - Leon Lederman
>     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
>     On 2018 Feb 21, 8:18 AM, John Hamilton wrote:
>
>         If I convert a data file from a Trimble receiver (R10) using teqc and send it to the Trimble RTX service (PPP), it only uses the GPS
>         satellites,
>         and ignores the other constellations. But, if I convert to rinex using the trimble utility, it processes all of the constellations. So, I
>         contacted RTX support, and here is the response I got back...
>
>         I think the issue lies with using the teqc converter to convert your files to RINEX – I’m not intimately familiar with this tool, but
>         perhaps
>         there is a misconfiguration, or the RINEX file being generated is not standard.
>
>         I always use teqc because I thought it would the the "most standard".
>
>
>
>         --
>         John Hamilton, PA PLS
>         Terrasurv, Inc
>         Pittsburgh, PA
>         Voice: +1-412-341-5620
>         Fax: +1-412-535-5185
>         File Transfer: terrasurv.wetransfer.com <http://terrasurv.wetransfer.com> <http://terrasurv.wetransfer.com
>         <http://terrasurv.wetransfer.com>>
>
>
>
>
> --
> John Hamilton, PA PLS
> Terrasurv, Inc
> Pittsburgh, PA
> Voice: +1-412-341-5620
> Fax: +1-412-535-5185
> File Transfer: terrasurv.wetransfer.com <http://terrasurv.wetransfer.com>


More information about the teqc mailing list