[teqc] helpful tip of week 1998

Lou Estey lou at unavco.org
Wed Apr 25 10:52:54 MDT 2018


This week's tip: qc 'lite' vs. 'full'

The next set of tips will be focused on teqc's "quality check" or qc.  This first
tip explains the shorthand terms 'lite' vs. 'full'.  (BTW, the 'lite' or 'light'
term goes back to one of the variations of the original Fortran-based QC UNAVCO
program of the early- to mid-1990's.  I adopted this term as teqc -- or at least the
initial C-code that eventually became teqc -- was being developed in 1996.)

There are basically two general sets of qc operations that one can perform:

1) counts of what observables one has, computation of multipath linear combinations
of dual-frequency or multi-frequency data, etc. -- all of which can be done without
knowing the position of the SV responsible for those observables;

2) additionally having SV ephemerides so that the the SV position in time and space
can be computed, and then, either computing the position of the antenna or using a
user-supplied antenna position, one can determine the elevation and azimuth of the
SV, and then do (1) based on elevation (and/or azimuth) thresholds.

So (1) is qc 'lite', i.e. the SV position is not known; and (2) is qc 'full', i.e. the
SV position and the antenna position are known.  Hence, 'lite' means "light-weight",
because all the positioning math is not done.

However, you might ask: What happens during qc if my dataset is mostly complete, but
missing ephemerides for one or two SVs?

For such cases, teqc automatically does a qc 'lite' for SVs where an SV position cannot
be determined (usually because of missing ephemerides) and does a qc 'full' for SVs
where the SV position can be determined.  Although, obviously, any qc parameters which
depend on knowing SV elevations will only be based on the qc 'full' SVs.

You might also ask: How can I switch from qc 'full' to qc 'lite' for a quick comparison?
There has always been one way of accomplishing this, and since 2011 Apr 8 there have been
two ways:

1) The original brute-force method, assuming one is qc-ing RINEX, is merely to not
have any RINEX nav files from the directory/folder where the RINEX obs file(s) being
qc-ed is located and to not use '-nav' to specify any RINEX nav files.  If there are no
RINEX nav files, then a qc of a RINEX obs file is qc 'lite', by definition.  However, if
the RINEX obs file contains data of GLONASS SVs, one still needs the frequency channel
numbers for each GLONASS SV in order to do cycle-to-distance conversion of the GLONASS
phase data (i.e. see again tip https://postal.unavco.org/pipermail/teqc/2018/002453.html) --
or live without a qc of the GLONASS pseudorange and phase observations.

2) As of 2011 Apr 8 there has been a '-no_orb[it]' option (covered in tip of the week
https://postal.unavco.org/pipermail/teqc/2016/002115.html) so that one can skip doing
an orbital position of SVs in an entire constellation.  Therefore, using the option
'-no_orb G,R,S,E,C,J,I' completely removes orbital position determination for all
seven constellations.  The beauty of this method of switching to qc 'lite' is that
one doesn't need to shuffle files around and, if the data is partly GLONASS, the
GLONASS navigation messages are still read in order to extract the frequency channel
numbers for each GLONASS SV slot number.

Happy teqc-ing!

cheers,
--lou

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Louis H. Estey, Ph.D.              office:  [+001] 303-381-7456
UNAVCO, 6350 Nautilus Drive           FAX:  [+001] 303-381-7451
Boulder, CO  80301-5554            e-mail:  lou  unavco.org

"If the universe is the answer, what is the question?"
                                                -- Leon Lederman
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Past helpful tips:

week 1894: using teqc config files - https://postal.unavco.org/pipermail/teqc/2016/002067.html
week 1895: qc of high-rate data - https://postal.unavco.org/pipermail/teqc/2016/002071.html
week 1896: UNIX/Linux shells for Windows - https://postal.unavco.org/pipermail/teqc/2016/002072.html
week 1897: '-' vs. '+' teqc options - https://postal.unavco.org/pipermail/teqc/2016/002076.html
week 1898: auto-identification of formats - https://postal.unavco.org/pipermail/teqc/2016/002092.html
week 1899: auto-identification vs. format flags - https://postal.unavco.org/pipermail/teqc/2016/002096.html
week 1900: square brackets in options - https://postal.unavco.org/pipermail/teqc/2016/002105.html
week 1901: using option '+mds' - https://postal.unavco.org/pipermail/teqc/2016/002108.html
week 1902: qc results w/ problematic nav messages - https://postal.unavco.org/pipermail/teqc/2016/002113.html
week 1903: '-no_orb[it]' and '-no_pos[ition]' options - https://postal.unavco.org/pipermail/teqc/2016/002115.html
week 1904: '-week' option - https://postal.unavco.org/pipermail/teqc/2016/002117.html
week 1905: using '+bcf' for XYZ/geodetic conversion - https://postal.unavco.org/pipermail/teqc/2016/002126.html
week 1906: the '+v[erify]' option - https://postal.unavco.org/pipermail/teqc/2016/002128.html
week 1907: '+C2', '+L5', "+L6', '+L7', '+L8', '+all' options - https://postal.unavco.org/pipermail/teqc/2016/002130.html
week 1908: getting RINEX doppler and L2 - https://postal.unavco.org/pipermail/teqc/2016/002131.html
week 1909: using paths w/ file names - https://postal.unavco.org/pipermail/teqc/2016/002132.html
week 1910: the (un)importance of file names - https://postal.unavco.org/pipermail/teqc/2016/002133.html
week 1911: notices, warnings, and errors - https://postal.unavco.org/pipermail/teqc/2016/002134.html
week 1912: the '-max_rx_SVs' option - https://postal.unavco.org/pipermail/teqc/2016/002137.html
week 1913: the end of '++igs' and '+igs' - https://postal.unavco.org/pipermail/teqc/2016/002140.html
week 1914: splicing together RINEX files - https://postal.unavco.org/pipermail/teqc/2016/002144.html
week 1915: using '-O.int' and '-O.dec' - https://postal.unavco.org/pipermail/teqc/2016/002145.html
week 1916: '+doy' option - https://postal.unavco.org/pipermail/teqc/2016/002146.html
week 1917: '-tbin' and '-ast' options - https://postal.unavco.org/pipermail/teqc/2016/002152.html
week 1918: mp12 RMS before/after Oct 2013 - https://postal.unavco.org/pipermail/teqc/2016/002158.html
week 1919: the global windowing options - https://postal.unavco.org/pipermail/teqc/2016/002159.html
week 1920: '-M.dec' and '-N.dec' options - https://postal.unavco.org/pipermail/teqc/2016/002163.html
week 1921: combining time filtering options - https://postal.unavco.org/pipermail/teqc/2016/002176.html
week 1922: helping me (or someone else on the list) help you - https://postal.unavco.org/pipermail/teqc/2016/002187.html
week 1923: the "build" line - https://postal.unavco.org/pipermail/teqc/2016/002190.html
week 1924: the qc '-w[idth]' option - https://postal.unavco.org/pipermail/teqc/2016/002193.html
week 1925: qc with explicit time windowing - https://postal.unavco.org/pipermail/teqc/2016/002194.html
week 1926: the '+rx_state' option - https://postal.unavco.org/pipermail/teqc/2016/002200.html
week 1927: the '-O.sum' option - https://postal.unavco.org/pipermail/teqc/2016/002204.html
week 1928: the '+meta' and '+mds' options - https://postal.unavco.org/pipermail/teqc/2016/002206.html
week 1930: more on '-O.sum' - https://postal.unavco.org/pipermail/teqc/2017/002207.html
week 1931: the '-O.s[ystem]' option - https://postal.unavco.org/pipermail/teqc/2017/002208.html
week 1932: leap seconds - https://postal.unavco.org/pipermail/teqc/2017/002215.html
week 1936: what you can (and shouldn't) do in a RINEX obs file - https://postal.unavco.org/pipermail/teqc/2017/002229.html
week 1938: the '+psp' option - https://postal.unavco.org/pipermail/teqc/2017/002231.html
week 1939: the '+diag' option - https://postal.unavco.org/pipermail/teqc/2017/002235.html
week 1951: '-n_<system>' and SV filtering options - https://postal.unavco.org/pipermail/teqc/2017/002277.html
week 1953: more with '+diag' option - https://postal.unavco.org/pipermail/teqc/2017/002287.html
week 1954: using '+diag' output to split raw files - https://postal.unavco.org/pipermail/teqc/2017/002290.html
week 1955: current qc notation - https://postal.unavco.org/pipermail/teqc/2017/002302.html
week 1956: the '+qcq' option - https://postal.unavco.org/pipermail/teqc/2017/002304.html
week 1957: using Trimble formats - https://postal.unavco.org/pipermail/teqc/2017/002305.html
week 1958: ToC != ToE messages - https://postal.unavco.org/pipermail/teqc/2017/002310.html
week 1959: receivers vs. formats - https://postal.unavco.org/pipermail/teqc/2017/002311.html
week 1960: when the '-week' option is very wrong to use - https://postal.unavco.org/pipermail/teqc/2017/002314.html
week 1961: "less" is usually best - https://postal.unavco.org/pipermail/teqc/2017/002315.html
week 1962: using GPS L2C with teqc - https://postal.unavco.org/pipermail/teqc/2017/002316.html
week 1964: the '+eds' options - https://postal.unavco.org/pipermail/teqc/2017/002317.html
week 1965: handling RINEX comment lines - https://postal.unavco.org/pipermail/teqc/2017/002324.html
week 1966: the '+dUTC_p' options - https://postal.unavco.org/pipermail/teqc/2017/002331.html
week 1967: the strange position from '+meta' - https://postal.unavco.org/pipermail/teqc/2017/002355.html
week 1972: what shows up as metadata in RINEX headers - https://postal.unavco.org/pipermail/teqc/2017/002362.html
week 1973: GPS L2C navigation messages - https://postal.unavco.org/pipermail/teqc/2017/002363.html
week 1974: the '+ion_p' options - https://postal.unavco.org/pipermail/teqc/2017/002370.html
week 1975: the '+event' options - https://postal.unavco.org/pipermail/teqc/2017/002372.html
week 1976: options '+smtt' (default) vs. '-smtt' - https://postal.unavco.org/pipermail/teqc/2017/002374.html
week 1977: the reported interval with '+meta' for a RINEX obs file - https://postal.unavco.org/pipermail/teqc/2017/002377.html
week 1978: the '-N.dUTC' options - https://postal.unavco.org/pipermail/teqc/2017/002378.html
week 1979: the various qc elevation angles - https://postal.unavco.org/pipermail/teqc/2017/002383.html
week 1980: avoid in RINEX: Transit data - https://postal.unavco.org/pipermail/teqc/2017/002385.html
week 1981: avoid in RINEX: epoch flag = 6 - https://postal.unavco.org/pipermail/teqc/2017/002389.html
week 1982: avoid in RINEX: RCV CLOCK OFFS APPL = 1 - https://postal.unavco.org/pipermail/teqc/2018/002392.html
week 1983: don't count on in RINEX: receiver clock offset per epoch - https://postal.unavco.org/pipermail/teqc/2018/002393.html
week 1984: requirements for multiple target files/stdin - https://postal.unavco.org/pipermail/teqc/2018/002410.html
week 1985: default output for various input - https://postal.unavco.org/pipermail/teqc/2018/002412.html
week 1986: the '+latency' options - https://postal.unavco.org/pipermail/teqc/2018/002419.html
week 1987: the 'O.px and 'O.pg' options - https://postal.unavco.org/pipermail/teqc/2018/002422.html
week 1988: the '+relax' option - https://postal.unavco.org/pipermail/teqc/2018/002423.html
week 1992: the '+x_tilt' options - https://postal.unavco.org/pipermail/teqc/2018/002452.html
week 1993: GLONASS: slot and freq. chnl. numbers - https://postal.unavco.org/pipermail/teqc/2018/002453.html
week 1994: GLONASS: slot numbers > 24 - https://postal.unavco.org/pipermail/teqc/2018/002454.html
week 1995: GLONASS: signals - https://postal.unavco.org/pipermail/teqc/2018/002456.html
week 1996: GLONASS: broadcast ephemeris - https://postal.unavco.org/pipermail/teqc/2018/002457.html
week 1997: GLONASS: system time and broadcast time parameters - https://postal.unavco.org/pipermail/teqc/2018/002458.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://postal.unavco.org/pipermail/teqc/attachments/20180425/e04d8706/attachment-0001.html>


More information about the teqc mailing list