[teqc] helpful tip of week 2015

Lou Estey lou at unavco.org
Wed Aug 22 14:32:48 MDT 2018


This week's tip: qc: loss-of-lock

Loss-of-lock on tracking the phase observable of a signal leads to slips, as discussed in
last week's tip https://postal.unavco.org/pipermail/teqc/2018/002393.html, and the qc
report is designed to show you when teqc detects possible slips.

The qc report is also designed to show you when the receiver's tracking of any phase
observable shows a loss-of-lock, assuming:

1) that the receiver format being used records a loss-of-lock indicator (and for most cases
this is true), and

2) if qc-ing RINEX, that the conversion to RINEX recorded the loss-of-lock in the LLI
flag, bit 0, of the phase observable (as per the RINEX spec).

In the qc, "slip" indicators are then determined by teqc by analyzing the phase (and
possibly other) observables as a function of time; "loss-of-lock" indicators are
reporting on flags from the receiver showing when the receiver determined a possible
phase slip may have occurred.

In the qc long report, the receiver's loss-of-lock counts for each SV can be found in
the multipath RMS summary in the "L* rx" columns for the two carrier frequencies involved
in each multipath combination, where 'L*' would be L1, L2, L5, L6, L7, or L8.  Note for
qc full (i.e. teqc has determined a point position for the antenna) that the "L* rx"
columns are split into two elevation regimes showing counts above and below 25 degrees
above the horizon.  This 25 degree value is the default, but can be changed with the
'-set_comp' option:

      -set_comp[arison,deg] #    set elevation comparison to # degrees (default = 25.00)

In an ideal situation, the count in the corresponding "slips" column (multipath slips detected
by teqc) should about equal the loss-of-lock counts in either of the two "L* rx" columns.
(Note: Due a long-standing bug -- corrected for the next release -- it is possible to see
a totally nonsensical value in one or more rows of the "L* rx" columns for random SVs.
If you see such a value, please disregard.)

In the ASCII time plot at the top of the qc report, a loss-of-lock indicator, 'L', will
occur if the above two conditions are met and there is no ionospheric or multipath slip
detected to overwrite the loss-of-lock indicator.  This overwriting occurs when a slip
is detected because the loss-of-lock indicator has a lower priority in the indicator
hierarchy than any of the slip indicators, i.e. a reminder from last week's tip:

[1001] teqc ++sym | more

QC Symbol codes for ASCII plot:

Symbol codes for "SV":
(hierarchy is left-to-right, top-to_bottom)
'  SV nav indicates unhealthy         K  position solution is uncertain
C  receiver clock slip                m  n-msec multipath jump
I  ionospheric phase slip             M  MP1 and MP2 or MP15 and MP51 slips
1  multipath MP12 slip                2  multipath MP21 slip
Z  multipath MP15 slip                5  multipath MP51 slip
T  multipath MP17 slip                7  multipath MP71 slip
S  multipath MP18 slip                8  multipath MP81 slip
Q  multipath MP16 slip                6  multipath MP61 slip
-  SV above elev mask, but no data    L  Bit 0 of LLI set (rx lost lock)
...

In an ideal situation, all or most of the 'L' loss-of-lock indicators in the ASCII
time plot should be overwritten by one of the slip indicators.  However, it is common
to see 'L' indicators at the beginning and end of a SV's track at low elevation,
e.g. one example among millions ftp://data-out.unavco.org/pub/rinex/qc/2018/230/p1972300.18S

And if you wish to view the ASCII time plot without any 'L' loss-of-lock indicators, use
the '-lli' option = "don't show Loss-of-Lock indicators" when doing the qc.  E.g. using
the '-lli' option would change ASCII time plot lines like these:

  12|eeee+L                LL+++++                            _L+eeeeeeeeeeee| 12
  13| LLoooooooooo++                              _Loooooooooooo+L           | 13
  15| LL+eeeeeeeeeeeee+L                              LLeeeeeeee++_          | 15
  17|                         ___                   L+eeeeeeeeeeeeeeeee++L   | 17

into these:

  12|eeee++                +++++++                            _++eeeeeeeeeeee| 12
  13| ++oooooooooo++                              _+oooooooooooo++           | 13
  15| +++eeeeeeeeeeeee++                              ++eeeeeeee++_          | 15
  17|                         ___                   ++eeeeeeeeeeeeeeeee+++   | 17

Happy teqc-ing!

cheers,
--lou

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Louis H. Estey, Ph.D.              office:  [+001] 303-381-7456
UNAVCO, 6350 Nautilus Drive           FAX:  [+001] 303-381-7451
Boulder, CO  80301-5554            e-mail:  lou  unavco.org

"If the universe is the answer, what is the question?"
                                                -- Leon Lederman
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Past helpful tips:

week 1894: using teqc config files - https://postal.unavco.org/pipermail/teqc/2016/002067.html
week 1895: qc of high-rate data - https://postal.unavco.org/pipermail/teqc/2016/002071.html
week 1896: UNIX/Linux shells for Windows - https://postal.unavco.org/pipermail/teqc/2016/002072.html
week 1897: '-' vs. '+' teqc options - https://postal.unavco.org/pipermail/teqc/2016/002076.html
week 1898: auto-identification of formats - https://postal.unavco.org/pipermail/teqc/2016/002092.html
week 1899: auto-identification vs. format flags - https://postal.unavco.org/pipermail/teqc/2016/002096.html
week 1900: square brackets in options - https://postal.unavco.org/pipermail/teqc/2016/002105.html
week 1901: using option '+mds' - https://postal.unavco.org/pipermail/teqc/2016/002108.html
week 1902: qc results w/ problematic nav messages - https://postal.unavco.org/pipermail/teqc/2016/002113.html
week 1903: '-no_orb[it]' and '-no_pos[ition]' options - https://postal.unavco.org/pipermail/teqc/2016/002115.html
week 1904: '-week' option - https://postal.unavco.org/pipermail/teqc/2016/002117.html
week 1905: using '+bcf' for XYZ/geodetic conversion - https://postal.unavco.org/pipermail/teqc/2016/002126.html
week 1906: the '+v[erify]' option - https://postal.unavco.org/pipermail/teqc/2016/002128.html
week 1907: '+C2', '+L5', "+L6', '+L7', '+L8', '+all' options - https://postal.unavco.org/pipermail/teqc/2016/002130.html
week 1908: getting RINEX doppler and L2 - https://postal.unavco.org/pipermail/teqc/2016/002131.html
week 1909: using paths w/ file names - https://postal.unavco.org/pipermail/teqc/2016/002132.html
week 1910: the (un)importance of file names - https://postal.unavco.org/pipermail/teqc/2016/002133.html
week 1911: notices, warnings, and errors - https://postal.unavco.org/pipermail/teqc/2016/002134.html
week 1912: the '-max_rx_SVs' option - https://postal.unavco.org/pipermail/teqc/2016/002137.html
week 1913: the end of '++igs' and '+igs' - https://postal.unavco.org/pipermail/teqc/2016/002140.html
week 1914: splicing together RINEX files - https://postal.unavco.org/pipermail/teqc/2016/002144.html
week 1915: using '-O.int' and '-O.dec' - https://postal.unavco.org/pipermail/teqc/2016/002145.html
week 1916: '+doy' option - https://postal.unavco.org/pipermail/teqc/2016/002146.html
week 1917: '-tbin' and '-ast' options - https://postal.unavco.org/pipermail/teqc/2016/002152.html
week 1918: mp12 RMS before/after Oct 2013 - https://postal.unavco.org/pipermail/teqc/2016/002158.html
week 1919: the global windowing options - https://postal.unavco.org/pipermail/teqc/2016/002159.html
week 1920: '-M.dec' and '-N.dec' options - https://postal.unavco.org/pipermail/teqc/2016/002163.html
week 1921: combining time filtering options - https://postal.unavco.org/pipermail/teqc/2016/002176.html
week 1922: helping me (or someone else on the list) help you - https://postal.unavco.org/pipermail/teqc/2016/002187.html
week 1923: the "build" line - https://postal.unavco.org/pipermail/teqc/2016/002190.html
week 1924: the qc '-w[idth]' option - https://postal.unavco.org/pipermail/teqc/2016/002193.html
week 1925: qc with explicit time windowing - https://postal.unavco.org/pipermail/teqc/2016/002194.html
week 1926: the '+rx_state' option - https://postal.unavco.org/pipermail/teqc/2016/002200.html
week 1927: the '-O.sum' option - https://postal.unavco.org/pipermail/teqc/2016/002204.html
week 1928: the '+meta' and '+mds' options - https://postal.unavco.org/pipermail/teqc/2016/002206.html
week 1930: more on '-O.sum' - https://postal.unavco.org/pipermail/teqc/2017/002207.html
week 1931: the '-O.s[ystem]' option - https://postal.unavco.org/pipermail/teqc/2017/002208.html
week 1932: leap seconds - https://postal.unavco.org/pipermail/teqc/2017/002215.html
week 1936: what you can (and shouldn't) do in a RINEX obs file - https://postal.unavco.org/pipermail/teqc/2017/002229.html
week 1938: the '+psp' option - https://postal.unavco.org/pipermail/teqc/2017/002231.html
week 1939: the '+diag' option - https://postal.unavco.org/pipermail/teqc/2017/002235.html
week 1951: '-n_<system>' and SV filtering options - https://postal.unavco.org/pipermail/teqc/2017/002277.html
week 1953: more with '+diag' option - https://postal.unavco.org/pipermail/teqc/2017/002287.html
week 1954: using '+diag' output to split raw files - https://postal.unavco.org/pipermail/teqc/2017/002290.html
week 1955: current qc notation - https://postal.unavco.org/pipermail/teqc/2017/002302.html
week 1956: the '+qcq' option - https://postal.unavco.org/pipermail/teqc/2017/002304.html
week 1957: using Trimble formats - https://postal.unavco.org/pipermail/teqc/2017/002305.html
week 1958: ToC != ToE messages - https://postal.unavco.org/pipermail/teqc/2017/002310.html
week 1959: receivers vs. formats - https://postal.unavco.org/pipermail/teqc/2017/002311.html
week 1960: when the '-week' option is very wrong to use - https://postal.unavco.org/pipermail/teqc/2017/002314.html
week 1961: "less" is usually best - https://postal.unavco.org/pipermail/teqc/2017/002315.html
week 1962: using GPS L2C with teqc - https://postal.unavco.org/pipermail/teqc/2017/002316.html
week 1964: the '+eds' options - https://postal.unavco.org/pipermail/teqc/2017/002317.html
week 1965: handling RINEX comment lines - https://postal.unavco.org/pipermail/teqc/2017/002324.html
week 1966: the '+dUTC_p' options - https://postal.unavco.org/pipermail/teqc/2017/002331.html
week 1967: the strange position from '+meta' - https://postal.unavco.org/pipermail/teqc/2017/002355.html
week 1972: what shows up as metadata in RINEX headers - https://postal.unavco.org/pipermail/teqc/2017/002362.html
week 1973: GPS L2C navigation messages - https://postal.unavco.org/pipermail/teqc/2017/002363.html
week 1974: the '+ion_p' options - https://postal.unavco.org/pipermail/teqc/2017/002370.html
week 1975: the '+event' options - https://postal.unavco.org/pipermail/teqc/2017/002372.html
week 1976: options '+smtt' (default) vs. '-smtt' - https://postal.unavco.org/pipermail/teqc/2017/002374.html
week 1977: the reported interval with '+meta' for a RINEX obs file - https://postal.unavco.org/pipermail/teqc/2017/002377.html
week 1978: the '-N.dUTC' options - https://postal.unavco.org/pipermail/teqc/2017/002378.html
week 1979: the various qc elevation angles - https://postal.unavco.org/pipermail/teqc/2017/002383.html
week 1980: avoid in RINEX: Transit data - https://postal.unavco.org/pipermail/teqc/2017/002385.html
week 1981: avoid in RINEX: epoch flag = 6 - https://postal.unavco.org/pipermail/teqc/2017/002389.html
week 1982: avoid in RINEX: RCV CLOCK OFFS APPL = 1 - https://postal.unavco.org/pipermail/teqc/2018/002392.html
week 1983: don't count on in RINEX: receiver clock offset per epoch - https://postal.unavco.org/pipermail/teqc/2018/002393.html
week 1984: requirements for multiple target files/stdin - https://postal.unavco.org/pipermail/teqc/2018/002410.html
week 1985: default output for various input - https://postal.unavco.org/pipermail/teqc/2018/002412.html
week 1986: the '+latency' options - https://postal.unavco.org/pipermail/teqc/2018/002419.html
week 1987: the 'O.px and 'O.pg' options - https://postal.unavco.org/pipermail/teqc/2018/002422.html
week 1988: the '+relax' option - https://postal.unavco.org/pipermail/teqc/2018/002423.html
week 1992: the '+x_tilt' options - https://postal.unavco.org/pipermail/teqc/2018/002452.html
week 1993: GLONASS: slot and freq. chnl. numbers - https://postal.unavco.org/pipermail/teqc/2018/002453.html
week 1994: GLONASS: slot numbers > 24 - https://postal.unavco.org/pipermail/teqc/2018/002454.html
week 1995: GLONASS: signals - https://postal.unavco.org/pipermail/teqc/2018/002456.html
week 1996: GLONASS: broadcast ephemeris - https://postal.unavco.org/pipermail/teqc/2018/002457.html
week 1997: GLONASS: system time and broadcast time parameters - https://postal.unavco.org/pipermail/teqc/2018/002458.html
week 1998: qc: 'lite' vs. 'full' - https://postal.unavco.org/pipermail/teqc/2018/002470.html
week 1999: qc: the 'full' point-position and the antenna 'height' - https://postal.unavco.org/pipermail/teqc/2018/002474.html
week 2000: qc: what's a "complete observation"? - https://postal.unavco.org/pipermail/teqc/2018/002475.html
week 2001: qc: percentage of actual to expected complete observations - https://postal.unavco.org/pipermail/teqc/2018/002483.html
week 2014: qc: interpreting slips - https://postal.unavco.org/pipermail/teqc/2018/002521.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://postal.unavco.org/pipermail/teqc/attachments/20180822/aab03534/attachment-0001.html>


More information about the teqc mailing list