[teqc] helpful tip of week 2027

Lou Estey lou at unavco.org
Wed Nov 14 14:20:26 MST 2018

This week's tip: qc: direct quality check of raw data

In case you missed it, and you need or want to quickly qc GNSS data, the last teqc release,
2018Oct15 -- links at http://www.unavco.org/software/data-processing/teqc/teqc.html#executables --
allows you to directly qc any raw data file of a format that teqc can read.  No fussing about
first translating to RINEX (with all the necessary options just for translation).

For the 2018Oct15 version, besides specifying '+qc' or '+qcq' (the latter being equivalent to
'+qc -report') to initiate the quality check:

     o You need to specify the window length, mainly for the ASCII timeplot at the
       beginning of the short report.
     o You might need to specify the raw data format.

For the first requirement above, see tip of week 1919 on global windowing options:
The simplest approach to accomplish this is to use something like '+dd 1' or '+dh 24' or '+dm 1440'
for a 24-hour window, although one could instead specify an explicit start time
with '-st' and an explicit end time with '-e', e.g. see tip of week 1925

The second possible requirement above is no different than if you needed to read the format
for translation.  But for most formats, and most data files, teqc's auto-identification of
the format will work; see tip of week 1898 https://postal.unavco.org/pipermail/teqc/2016/002092.html

Here's what you _don't_ have to do when qc-ing a raw data file:

     o You don't need to bother with setting '+all' or '+extend' to qc any GNSS data.

Both of these options are automatically invoked with a qc of raw data, so all GNSS present
will be qc-ed -- unless, of course, you are filtering out something by explicit command options;
see review in tip of week 2024 https://postal.unavco.org/pipermail/teqc/2018/002557.html


For the next teqc release (after 2018Oct15):

Instead of being limited to raw data files, you will also be able to qc a raw data stream
via stdin.  (This capability was not quite ready for the 2018Oct15 release and it wasn't clear
exactly how far "down the rabbit hole" I would need to go in order to have teqc do a qc on
a data stream, but in the final analysis it was fairly easy given the changes to teqc's
internal qc design done over the last two years.)  However, to qc a stream (stdin to teqc),
you will absolutely need to specify the raw data format of the stream, just as you would
need to do for any other operation to read a stream with teqc.

Also, in the next release, the first requirement will not be 100% necessary, since:

     o If qc-ing a file, there will be an automatic default window length of 24 hours.

     o If qc-ing a stream, there will be an automatic default window length of 30 seconds.

These default window lengths, of course, can be overridden in the usual ways.

But, if you happen to have a 24-hour file of GNSS raw data, and it's a format that teqc can
read, to do a qc starting with the next release could be as simple as:

	teqc +qc filename
	teqc +qcq filename

Happy teqc-ing!


Louis H. Estey, Ph.D.              office:  [+001] 303-381-7456
UNAVCO, 6350 Nautilus Drive           FAX:  [+001] 303-381-7451
Boulder, CO  80301-5554            e-mail:  lou  unavco.org

"If the universe is the answer, what is the question?"
                                                -- Leon Lederman

Past helpful tips:

week 1894: using teqc config files - https://postal.unavco.org/pipermail/teqc/2016/002067.html
week 1895: qc of high-rate data - https://postal.unavco.org/pipermail/teqc/2016/002071.html
week 1896: UNIX/Linux shells for Windows - https://postal.unavco.org/pipermail/teqc/2016/002072.html
week 1897: '-' vs. '+' teqc options - https://postal.unavco.org/pipermail/teqc/2016/002076.html
week 1898: auto-identification of formats - https://postal.unavco.org/pipermail/teqc/2016/002092.html
week 1899: auto-identification vs. format flags - https://postal.unavco.org/pipermail/teqc/2016/002096.html
week 1900: square brackets in options - https://postal.unavco.org/pipermail/teqc/2016/002105.html
week 1901: using option '+mds' - https://postal.unavco.org/pipermail/teqc/2016/002108.html
week 1902: qc results w/ problematic nav messages - https://postal.unavco.org/pipermail/teqc/2016/002113.html
week 1903: '-no_orb[it]' and '-no_pos[ition]' options - https://postal.unavco.org/pipermail/teqc/2016/002115.html
week 1904: '-week' option - https://postal.unavco.org/pipermail/teqc/2016/002117.html
week 1905: using '+bcf' for XYZ/geodetic conversion - https://postal.unavco.org/pipermail/teqc/2016/002126.html
week 1906: the '+v[erify]' option - https://postal.unavco.org/pipermail/teqc/2016/002128.html
week 1907: '+C2', '+L5', "+L6', '+L7', '+L8', '+all' options - https://postal.unavco.org/pipermail/teqc/2016/002130.html
week 1908: getting RINEX doppler and L2 - https://postal.unavco.org/pipermail/teqc/2016/002131.html
week 1909: using paths w/ file names - https://postal.unavco.org/pipermail/teqc/2016/002132.html
week 1910: the (un)importance of file names - https://postal.unavco.org/pipermail/teqc/2016/002133.html
week 1911: notices, warnings, and errors - https://postal.unavco.org/pipermail/teqc/2016/002134.html
week 1912: the '-max_rx_SVs' option - https://postal.unavco.org/pipermail/teqc/2016/002137.html
week 1913: the end of '++igs' and '+igs' - https://postal.unavco.org/pipermail/teqc/2016/002140.html
week 1914: splicing together RINEX files - https://postal.unavco.org/pipermail/teqc/2016/002144.html
week 1915: using '-O.int' and '-O.dec' - https://postal.unavco.org/pipermail/teqc/2016/002145.html
week 1916: '+doy' option - https://postal.unavco.org/pipermail/teqc/2016/002146.html
week 1917: '-tbin' and '-ast' options - https://postal.unavco.org/pipermail/teqc/2016/002152.html
week 1918: mp12 RMS before/after Oct 2013 - https://postal.unavco.org/pipermail/teqc/2016/002158.html
week 1919: the global windowing options - https://postal.unavco.org/pipermail/teqc/2016/002159.html
week 1920: '-M.dec' and '-N.dec' options - https://postal.unavco.org/pipermail/teqc/2016/002163.html
week 1921: combining time filtering options - https://postal.unavco.org/pipermail/teqc/2016/002176.html
week 1922: helping me (or someone else on the list) help you - https://postal.unavco.org/pipermail/teqc/2016/002187.html
week 1923: the "build" line - https://postal.unavco.org/pipermail/teqc/2016/002190.html
week 1924: the qc '-w[idth]' option - https://postal.unavco.org/pipermail/teqc/2016/002193.html
week 1925: qc with explicit time windowing - https://postal.unavco.org/pipermail/teqc/2016/002194.html
week 1926: the '+rx_state' option - https://postal.unavco.org/pipermail/teqc/2016/002200.html
week 1927: the '-O.sum' option - https://postal.unavco.org/pipermail/teqc/2016/002204.html
week 1928: the '+meta' and '+mds' options - https://postal.unavco.org/pipermail/teqc/2016/002206.html
week 1930: more on '-O.sum' - https://postal.unavco.org/pipermail/teqc/2017/002207.html
week 1931: the '-O.s[ystem]' option - https://postal.unavco.org/pipermail/teqc/2017/002208.html
week 1932: leap seconds - https://postal.unavco.org/pipermail/teqc/2017/002215.html
week 1936: what you can (and shouldn't) do in a RINEX obs file - https://postal.unavco.org/pipermail/teqc/2017/002229.html
week 1938: the '+psp' option - https://postal.unavco.org/pipermail/teqc/2017/002231.html
week 1939: the '+diag' option - https://postal.unavco.org/pipermail/teqc/2017/002235.html
week 1951: '-n_<system>' and SV filtering options - https://postal.unavco.org/pipermail/teqc/2017/002277.html
week 1953: more with '+diag' option - https://postal.unavco.org/pipermail/teqc/2017/002287.html
week 1954: using '+diag' output to split raw files - https://postal.unavco.org/pipermail/teqc/2017/002290.html
week 1955: current qc notation - https://postal.unavco.org/pipermail/teqc/2017/002302.html
week 1956: the '+qcq' option - https://postal.unavco.org/pipermail/teqc/2017/002304.html
week 1957: using Trimble formats - https://postal.unavco.org/pipermail/teqc/2017/002305.html
week 1958: ToC != ToE messages - https://postal.unavco.org/pipermail/teqc/2017/002310.html
week 1959: receivers vs. formats - https://postal.unavco.org/pipermail/teqc/2017/002311.html
week 1960: when the '-week' option is very wrong to use - https://postal.unavco.org/pipermail/teqc/2017/002314.html
week 1961: "less" is usually best - https://postal.unavco.org/pipermail/teqc/2017/002315.html
week 1962: using GPS L2C with teqc - https://postal.unavco.org/pipermail/teqc/2017/002316.html
week 1964: the '+eds' options - https://postal.unavco.org/pipermail/teqc/2017/002317.html
week 1965: handling RINEX comment lines - https://postal.unavco.org/pipermail/teqc/2017/002324.html
week 1966: the '+dUTC_p' options - https://postal.unavco.org/pipermail/teqc/2017/002331.html
week 1967: the strange position from '+meta' - https://postal.unavco.org/pipermail/teqc/2017/002355.html
week 1972: what shows up as metadata in RINEX headers - https://postal.unavco.org/pipermail/teqc/2017/002362.html
week 1973: GPS L2C navigation messages - https://postal.unavco.org/pipermail/teqc/2017/002363.html
week 1974: the '+ion_p' options - https://postal.unavco.org/pipermail/teqc/2017/002370.html
week 1975: the '+event' options - https://postal.unavco.org/pipermail/teqc/2017/002372.html
week 1976: options '+smtt' (default) vs. '-smtt' - https://postal.unavco.org/pipermail/teqc/2017/002374.html
week 1977: the reported interval with '+meta' for a RINEX obs file - https://postal.unavco.org/pipermail/teqc/2017/002377.html
week 1978: the '-N.dUTC' options - https://postal.unavco.org/pipermail/teqc/2017/002378.html
week 1979: the various qc elevation angles - https://postal.unavco.org/pipermail/teqc/2017/002383.html
week 1980: avoid in RINEX: Transit data - https://postal.unavco.org/pipermail/teqc/2017/002385.html
week 1981: avoid in RINEX: epoch flag = 6 - https://postal.unavco.org/pipermail/teqc/2017/002389.html
week 1982: avoid in RINEX: RCV CLOCK OFFS APPL = 1 - https://postal.unavco.org/pipermail/teqc/2018/002392.html
week 1983: don't count on in RINEX: receiver clock offset per epoch - https://postal.unavco.org/pipermail/teqc/2018/002393.html
week 1984: requirements for multiple target files/stdin - https://postal.unavco.org/pipermail/teqc/2018/002410.html
week 1985: default output for various input - https://postal.unavco.org/pipermail/teqc/2018/002412.html
week 1986: the '+latency' options - https://postal.unavco.org/pipermail/teqc/2018/002419.html
week 1987: the 'O.px and 'O.pg' options - https://postal.unavco.org/pipermail/teqc/2018/002422.html
week 1988: the '+relax' option - https://postal.unavco.org/pipermail/teqc/2018/002423.html
week 1992: the '+x_tilt' options - https://postal.unavco.org/pipermail/teqc/2018/002452.html
week 1993: GLONASS: slot and freq. chnl. numbers - https://postal.unavco.org/pipermail/teqc/2018/002453.html
week 1994: GLONASS: slot numbers > 24 - https://postal.unavco.org/pipermail/teqc/2018/002454.html
week 1995: GLONASS: signals - https://postal.unavco.org/pipermail/teqc/2018/002456.html
week 1996: GLONASS: broadcast ephemeris - https://postal.unavco.org/pipermail/teqc/2018/002457.html
week 1997: GLONASS: system time and broadcast time parameters - https://postal.unavco.org/pipermail/teqc/2018/002458.html
week 1998: qc: 'lite' vs. 'full' - https://postal.unavco.org/pipermail/teqc/2018/002470.html
week 1999: qc: the 'full' point-position and the antenna 'height' - https://postal.unavco.org/pipermail/teqc/2018/002474.html
week 2000: qc: what's a "complete observation"? - https://postal.unavco.org/pipermail/teqc/2018/002475.html
week 2001: qc: percentage of actual to expected complete observations - https://postal.unavco.org/pipermail/teqc/2018/002483.html
week 2014: qc: interpreting slips - https://postal.unavco.org/pipermail/teqc/2018/002521.html
week 2015: qc: loss-of-lock - https://postal.unavco.org/pipermail/teqc/2018/002524.html
week 2016: qc: observations per slip - https://postal.unavco.org/pipermail/teqc/2018/002526.html
week 2017: qc: multipath rms - https://postal.unavco.org/pipermail/teqc/2018/002527.html
week 2018: qc: signal-to-noise - https://postal.unavco.org/pipermail/teqc/2018/002532.html
week 2019: qc: the ASCII time plot - https://postal.unavco.org/pipermail/teqc/2018/002534.html
week 2020: qc: little known (but sometimes useful) options - https://postal.unavco.org/pipermail/teqc/2018/002535.html
week 2021: qc: qc full: the '-dn' and '+dn' ASCII time plot lines, part I - https://postal.unavco.org/pipermail/teqc/2018/002544.html
week 2022: qc: qc full: the '-dn' and '+dn' ASCII time plot lines, part II - https://postal.unavco.org/pipermail/teqc/2018/002554.html
week 2023: qc: point-position elevation restrictions - https://postal.unavco.org/pipermail/teqc/2018/002556.html
week 2024: qc: main "filtering" possibilities - https://postal.unavco.org/pipermail/teqc/2018/002557.html
week 2025: qc: expectations for teqc's PP in Solar Cycle 25 - https://postal.unavco.org/pipermail/teqc/2018/002558.html
week 2026: qc: when the antenna is moving (a lot) - https://postal.unavco.org/pipermail/teqc/2018/002564.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://postal.unavco.org/pipermail/teqc/attachments/20181114/5c13ead2/attachment-0001.html>

More information about the teqc mailing list