[teqc] helpful tip of week 2030

Lou Estey lou at unavco.org
Wed Dec 5 09:49:40 MST 2018

This week's tip: "no routine" messages in stderr

Buried within the C code that is teqc are over 100 cases that might write out to stderr
a message about "no routine" for whatever is being attempted. (Various past versions
of teqc might have had some of these messages saying "no code" or "no function" or
some other variant, but all such cases should have converged, especially for the
next teqc release, to say "no routine".) Hopefully you've never encountered one of
these messages, but this tip is to try to explain some possible contexts if you do.

No piece of software can do everything and teqc is no exception. The goal is to try to
help you to navigate the complex environment of GNSS constellations, to understand the
signals that the SVs in those constellations broadcast, to read formats that hold the
observables of those signals, to obtain a quality check of the observables, and so on.
But there are obviously plenty of avenues where something "unexpected" can show up. A
"no routine" message attempts to give you at least some information about such a situation.

One of the more likely possibilities is that a manufacturer has added a new record type
in a format that teqc normally reads, but since this new record is probably unknown
to me (the author of teqc), you would get something like:

! Notice ! no routine for <format name> record <record ID> ... skipping

... and hopefully teqc is able to plow through the rest of the file (or stream) and
largely complete its mission. The exception here is if the new record type is where
the manufacturer is now putting all or some of the GNSS observations, or all or some
of the GNSS ephemerides, or all or some of the ancillary site data (like meteorological
observations). If this occurs -- which will require research on your part to determine
what the record is that teqc is telling you about -- then you will almost definitely be
missing something that you otherwise expected.

The above "no routine" message is of the "Notice" type, meaning that the '-notice' or
'+quiet' options will suppress them. (Review messages for notices, warnings, and errors
in tip of the week 1911 https://postal.unavco.org/pipermail/teqc/2016/002134.html.)
Likewise, there are "no routine" messages of the "Warning" type which are suppressed
if using the '-warn' or '+quiet' options. This means that if you're using something
new, like a new receiver type or new firmware, and the unexpected occurs, make sure
you are not using '-notice', '-warn', or '+quiet' so that hopefully teqc can give
you some guidance. And note that the "no routine" messages of the "Error" type should
not be suppressed by these options.

At any rate, hopefully you do not encounter "no routine" messages too often.

Happy teqc-ing!


Louis H. Estey, Ph.D.               office: [+001] 303-381-7456
UNAVCO, 6350 Nautilus Drive            FAX: [+001] 303-381-7451
Boulder, CO 80301-5554                   e-mail: lou unavco.org

"If the universe is the answer, what is the question?"
                                                -- Leon Lederman

Past helpful tips:

week 1894: using teqc config files - https://postal.unavco.org/pipermail/teqc/2016/002067.html
week 1895: qc of high-rate data - https://postal.unavco.org/pipermail/teqc/2016/002071.html
week 1896: UNIX/Linux shells for Windows - https://postal.unavco.org/pipermail/teqc/2016/002072.html
week 1897: '-' vs. '+' teqc options - https://postal.unavco.org/pipermail/teqc/2016/002076.html
week 1898: auto-identification of formats - https://postal.unavco.org/pipermail/teqc/2016/002092.html
week 1899: auto-identification vs. format flags - https://postal.unavco.org/pipermail/teqc/2016/002096.html
week 1900: square brackets in options - https://postal.unavco.org/pipermail/teqc/2016/002105.html
week 1901: using option '+mds' - https://postal.unavco.org/pipermail/teqc/2016/002108.html
week 1902: qc results w/ problematic nav messages - https://postal.unavco.org/pipermail/teqc/2016/002113.html
week 1903: '-no_orb[it]' and '-no_pos[ition]' options - https://postal.unavco.org/pipermail/teqc/2016/002115.html
week 1904: '-week' option - https://postal.unavco.org/pipermail/teqc/2016/002117.html
week 1905: using '+bcf' for XYZ/geodetic conversion - https://postal.unavco.org/pipermail/teqc/2016/002126.html
week 1906: the '+v[erify]' option - https://postal.unavco.org/pipermail/teqc/2016/002128.html
week 1907: '+C2', '+L5', "+L6', '+L7', '+L8', '+all' options - https://postal.unavco.org/pipermail/teqc/2016/002130.html
week 1908: getting RINEX doppler and L2 - https://postal.unavco.org/pipermail/teqc/2016/002131.html
week 1909: using paths w/ file names - https://postal.unavco.org/pipermail/teqc/2016/002132.html
week 1910: the (un)importance of file names - https://postal.unavco.org/pipermail/teqc/2016/002133.html
week 1911: notices, warnings, and errors - https://postal.unavco.org/pipermail/teqc/2016/002134.html
week 1912: the '-max_rx_SVs' option - https://postal.unavco.org/pipermail/teqc/2016/002137.html
week 1913: the end of '++igs' and '+igs' - https://postal.unavco.org/pipermail/teqc/2016/002140.html
week 1914: splicing together RINEX files - https://postal.unavco.org/pipermail/teqc/2016/002144.html
week 1915: using '-O.int' and '-O.dec' - https://postal.unavco.org/pipermail/teqc/2016/002145.html
week 1916: '+doy' option - https://postal.unavco.org/pipermail/teqc/2016/002146.html
week 1917: '-tbin' and '-ast' options - https://postal.unavco.org/pipermail/teqc/2016/002152.html
week 1918: mp12 RMS before/after Oct 2013 - https://postal.unavco.org/pipermail/teqc/2016/002158.html
week 1919: the global windowing options - https://postal.unavco.org/pipermail/teqc/2016/002159.html
week 1920: '-M.dec' and '-N.dec' options - https://postal.unavco.org/pipermail/teqc/2016/002163.html
week 1921: combining time filtering options - https://postal.unavco.org/pipermail/teqc/2016/002176.html
week 1922: helping me (or someone else on the list) help you - https://postal.unavco.org/pipermail/teqc/2016/002187.html
week 1923: the "build" line - https://postal.unavco.org/pipermail/teqc/2016/002190.html
week 1924: the qc '-w[idth]' option - https://postal.unavco.org/pipermail/teqc/2016/002193.html
week 1925: qc with explicit time windowing - https://postal.unavco.org/pipermail/teqc/2016/002194.html
week 1926: the '+rx_state' option - https://postal.unavco.org/pipermail/teqc/2016/002200.html
week 1927: the '-O.sum' option - https://postal.unavco.org/pipermail/teqc/2016/002204.html
week 1928: the '+meta' and '+mds' options - https://postal.unavco.org/pipermail/teqc/2016/002206.html
week 1930: more on '-O.sum' - https://postal.unavco.org/pipermail/teqc/2017/002207.html
week 1931: the '-O.s[ystem]' option - https://postal.unavco.org/pipermail/teqc/2017/002208.html
week 1932: leap seconds - https://postal.unavco.org/pipermail/teqc/2017/002215.html
week 1936: what you can (and shouldn't) do in a RINEX obs file - https://postal.unavco.org/pipermail/teqc/2017/002229.html
week 1938: the '+psp' option - https://postal.unavco.org/pipermail/teqc/2017/002231.html
week 1939: the '+diag' option - https://postal.unavco.org/pipermail/teqc/2017/002235.html
week 1951: '-n_<system>' and SV filtering options - https://postal.unavco.org/pipermail/teqc/2017/002277.html
week 1953: more with '+diag' option - https://postal.unavco.org/pipermail/teqc/2017/002287.html
week 1954: using '+diag' output to split raw files - https://postal.unavco.org/pipermail/teqc/2017/002290.html
week 1955: current qc notation - https://postal.unavco.org/pipermail/teqc/2017/002302.html
week 1956: the '+qcq' option - https://postal.unavco.org/pipermail/teqc/2017/002304.html
week 1957: using Trimble formats - https://postal.unavco.org/pipermail/teqc/2017/002305.html
week 1958: ToC != ToE messages - https://postal.unavco.org/pipermail/teqc/2017/002310.html
week 1959: receivers vs. formats - https://postal.unavco.org/pipermail/teqc/2017/002311.html
week 1960: when the '-week' option is very wrong to use - https://postal.unavco.org/pipermail/teqc/2017/002314.html
week 1961: "less" is usually best - https://postal.unavco.org/pipermail/teqc/2017/002315.html
week 1962: using GPS L2C with teqc - https://postal.unavco.org/pipermail/teqc/2017/002316.html
week 1964: the '+eds' options - https://postal.unavco.org/pipermail/teqc/2017/002317.html
week 1965: handling RINEX comment lines - https://postal.unavco.org/pipermail/teqc/2017/002324.html
week 1966: the '+dUTC_p' options - https://postal.unavco.org/pipermail/teqc/2017/002331.html
week 1967: the strange position from '+meta' - https://postal.unavco.org/pipermail/teqc/2017/002355.html
week 1972: what shows up as metadata in RINEX headers - https://postal.unavco.org/pipermail/teqc/2017/002362.html
week 1973: GPS L2C navigation messages - https://postal.unavco.org/pipermail/teqc/2017/002363.html
week 1974: the '+ion_p' options - https://postal.unavco.org/pipermail/teqc/2017/002370.html
week 1975: the '+event' options - https://postal.unavco.org/pipermail/teqc/2017/002372.html
week 1976: options '+smtt' (default) vs. '-smtt' - https://postal.unavco.org/pipermail/teqc/2017/002374.html
week 1977: the reported interval with '+meta' for a RINEX obs file - https://postal.unavco.org/pipermail/teqc/2017/002377.html
week 1978: the '-N.dUTC' options - https://postal.unavco.org/pipermail/teqc/2017/002378.html
week 1979: the various qc elevation angles - https://postal.unavco.org/pipermail/teqc/2017/002383.html
week 1980: avoid in RINEX: Transit data - https://postal.unavco.org/pipermail/teqc/2017/002385.html
week 1981: avoid in RINEX: epoch flag = 6 - https://postal.unavco.org/pipermail/teqc/2017/002389.html
week 1982: avoid in RINEX: RCV CLOCK OFFS APPL = 1 - https://postal.unavco.org/pipermail/teqc/2018/002392.html
week 1983: don't count on in RINEX: receiver clock offset per epoch - https://postal.unavco.org/pipermail/teqc/2018/002393.html
week 1984: requirements for multiple target files/stdin - https://postal.unavco.org/pipermail/teqc/2018/002410.html
week 1985: default output for various input - https://postal.unavco.org/pipermail/teqc/2018/002412.html
week 1986: the '+latency' options - https://postal.unavco.org/pipermail/teqc/2018/002419.html
week 1987: the 'O.px and 'O.pg' options - https://postal.unavco.org/pipermail/teqc/2018/002422.html
week 1988: the '+relax' option - https://postal.unavco.org/pipermail/teqc/2018/002423.html
week 1992: the '+x_tilt' options - https://postal.unavco.org/pipermail/teqc/2018/002452.html
week 1993: GLONASS: slot and freq. chnl. numbers - https://postal.unavco.org/pipermail/teqc/2018/002453.html
week 1994: GLONASS: slot numbers > 24 - https://postal.unavco.org/pipermail/teqc/2018/002454.html
week 1995: GLONASS: signals - https://postal.unavco.org/pipermail/teqc/2018/002456.html
week 1996: GLONASS: broadcast ephemeris - https://postal.unavco.org/pipermail/teqc/2018/002457.html
week 1997: GLONASS: system time and broadcast time parameters - https://postal.unavco.org/pipermail/teqc/2018/002458.html
week 1998: qc: 'lite' vs. 'full' - https://postal.unavco.org/pipermail/teqc/2018/002470.html
week 1999: qc: the 'full' point-position and the antenna 'height' - https://postal.unavco.org/pipermail/teqc/2018/002474.html
week 2000: qc: what's a "complete observation"? - https://postal.unavco.org/pipermail/teqc/2018/002475.html
week 2001: qc: percentage of actual to expected complete observations - https://postal.unavco.org/pipermail/teqc/2018/002483.html
week 2014: qc: interpreting slips - https://postal.unavco.org/pipermail/teqc/2018/002521.html
week 2015: qc: loss-of-lock - https://postal.unavco.org/pipermail/teqc/2018/002524.html
week 2016: qc: observations per slip - https://postal.unavco.org/pipermail/teqc/2018/002526.html
week 2017: qc: multipath rms - https://postal.unavco.org/pipermail/teqc/2018/002527.html
week 2018: qc: signal-to-noise - https://postal.unavco.org/pipermail/teqc/2018/002532.html
week 2019: qc: the ASCII time plot - https://postal.unavco.org/pipermail/teqc/2018/002534.html
week 2020: qc: little known (but sometimes useful) options - https://postal.unavco.org/pipermail/teqc/2018/002535.html
week 2021: qc: qc full: the '-dn' and '+dn' ASCII time plot lines, part I - https://postal.unavco.org/pipermail/teqc/2018/002544.html
week 2022: qc: qc full: the '-dn' and '+dn' ASCII time plot lines, part II - https://postal.unavco.org/pipermail/teqc/2018/002554.html
week 2023: qc: point-position elevation restrictions - https://postal.unavco.org/pipermail/teqc/2018/002556.html
week 2024: qc: main "filtering" possibilities - https://postal.unavco.org/pipermail/teqc/2018/002557.html
week 2025: qc: expectations for teqc's PP in Solar Cycle 25 - https://postal.unavco.org/pipermail/teqc/2018/002558.html
week 2026: qc: when the antenna is moving (a lot) - https://postal.unavco.org/pipermail/teqc/2018/002564.html
week 2027: qc: direct quality check of raw data - https://postal.unavco.org/pipermail/teqc/2018/002569.html
week 2028: navigation message intervals and using '-tbin' - https://ls.unavco.org/pipermail/teqc/2018/002578.html
week 2029: the '-ns' and '-ne' time windowing options - https://ls.unavco.org/pipermail/teqc/2018/002579.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://postal.unavco.org/pipermail/teqc/attachments/20181205/0c15febc/attachment-0001.html>

More information about the teqc mailing list