[teqc] next official version of teqc on-line (2018 Dec 12)
lou at unavco.org
Thu Jan 3 10:18:47 MST 2019
2018 Dec 12 builds for Allwinner H5 ARM 64-bit processor are now available;
use the link below and look for the appropriate builds.
On 12-Dec-18 10:11 AM, Lou Estey wrote:
> dear All,
> The next official version -- 2018Dec12 -- of teqc is on-line:
> As usual, save a copy of your previous teqc executable in case there is some unexpected
> problem with the new executable. Again, I _strongly_ encourage everyone to download
> this new version, try it out, and promptly report anything which you think is a bug or
> error. (You may want to review https://postal.unavco.org/pipermail/teqc/2016/002187.html.)
> The main changes and fixes since 2018 Oct 15 are given in detail in reverse chronological
> order starting at: https://www.unavco.org/software/data-processing/teqc/log/log.html#2018Dec12 --
> but here's a brief summary about the main changes between this release and the last one:
> - Doing a qc on a raw data file or stream should now be even easier:
> o a default qc window of 24 hours is assumed for qc of a raw data file
> o a default qc window of 30 seconds is assumed for qc of a stream
> And of course either of these default window lengths can be overridden by using one of
> the '+dX' options, e.g. '+dh 12' for 12 hours, '+ds 120' for 120 seconds, '+dm 15' for
> 15 minutes, etc.
> - All windowing functionality should now be working when doing a qc on a raw data file or
> stream, including the '-ns' and '-ne' options, e.g. the tip of week 2029,
> - GPS CNAV/CNAV2 navigation messages, if present and detected, should be _excluded_
> by default from GPS RINEX nav output. (*)
> - QZSS CNAV/CNAV2 navigation messages, if present and detected, should be _excluded_
> by default from QZSS RINEX nav output. (*)
> - Galileo F/NAV navigation messages, if present and detected, should be _included_
> by default in Galileo RINEX nav output. (*)
> - Galileo F/NAV navigation messages, if present, are internally _excluded_ from being used
> in qc point-position solutions, along with not using any pseudoranges from Galileo E5a,
> E5a+b, or E6.
> - A new qc '+eepd' option has been added, which is like the '+eepg' option, except '+eepd'
> outputs the geographic coordinates of the qc point-position solutions in decimal degrees.
> - New 'Alert' stderr messages have been added for any detected changes in receiver firmware
> or detected changes in model type or number for a receiver or antenna.
> - Reading new u-blox UBX-RXM-RAWX (0x1215) "version 1" message has been expanded for
> multi-frequency observations per constellation, plus correction to eliminate phase or
> pseudorange observables from being used if not set to be "valid".
> * There are two new options, '-eph' and '+eph' which can be used to change the new default
> behaviour, which is equivalent to '-eph G:CNAV,G:CNAV2,J:CNAV,J:CNAV2'. For example, to
> also exclude Galileo F/NAV in Galileo RINEX nav output, use '-eph E:F/NAV'. But it is
> strongly advised not to use '-eph' or '+eph' unless you are quite certain you know what
> you are going, or just want to experiment. Also, be advised that detection of GPS LNAV
> vs. CNAV/CNAV2, QZSS LNAV vs. CNAV/CNAV2, or Galileo I/NAV vs. F/NAV can potentially be
> Currently 2018 Dec 12 builds for Allwinner H5 ARM 64-bit processor are not yet available,
> but hopefully will be soon. I'll keep you informed.
> As with several past versions, some builds are no longer available with this release:
> - any HP-UX builds
> - the 32-bit Borland build for Windows; instead, use the Mingw-32 or Mingw-64 bit builds
> - the Mac OSX i5 gcc 4.2 64-bit build; instead, use the OSX i5 gcc 4.3 64-bit build
> - Solaris Sparc 5.9 builds
> If you have any questions, please let me know.
> Louis H. Estey, Ph.D. office: [+001] 303-381-7456
> UNAVCO, 6350 Nautilus Drive FAX: [+001] 303-381-7451
> Boulder, CO 80301-5554 e-mail: lou unavco.org
> "If the universe is the answer, what is the question?"
> -- Leon Lederman
More information about the teqc