[teqc] Leica GMX902

Kevin Shackleton krshackleton at gmail.com
Tue Jun 18 08:07:55 UTC 2019


Hi Nicolas and thank you for your reassurance.

After one half-hearted test I was discouraged.

I will run a better test, with two stations in good open sky, and using the
many option switches you have kindly shown.

Feedback in a few days!

Regards,
Kevin.



On Tue, 18 Jun 2019 at 15:07, Nicolas d'Oreye <ndo at ecgs.lu> wrote:

> Kevin,
>
> It works for us.
>
> Suppose you have
> - several lb2 file from a GMX902 in a given dir (say WDIR)
> - glonass orbits for the translation to be complete (say
> in ORBPATH/brdcDOY0.YYg)
> and you want to create a rinex file for a given day (sat YYYY_MM_DD) from
> your several lb2 files
>
> The following should help:
> 1. list your lb2 files as FLIST
> 2. teqc -leica lb2 +obs tmp.obs -st YYYY_MM_DD:00:00:00
> -e YYYY_MM_DD:23:59:59 -nav ORBPATH/brdcDOY0.YYg FLIST
> (or if no Glonass :  teqc -leica lb2 -st YYYY_MM_DD:00:00:00
> -e YYYY_MM_DD:23:59:59 FLIST > tmp.obs)
> 3. edit header if you have a txt file describing the config or your
> station (config-STATION)
>    teqc -notice -config config-STATION tmp.obs > STA_DOY0.YYo
>
> Hope it helps
>
> Nicolas
>
> Dr Nicolas d'Oreye de Lantremange
> Dept. Geophysics/Astrophysics
> National Museum of Natural History
> European Center For Geodynamics and Seismology
> 19 rue Josy Welter
> L-7256 Walferdange
> Gd Duchy of Luxembourg
> Tel: +352/33.14.87.33
> Fax: +352/33.14.87.88
> Mobile: +352/691.45.95.65
> ndo at ecgs.lu
> www.ecgs.lu
> http://www.ecgs.lu/gorisk/
> http://www.virunga-volcanoes.org
>
> On 18 Jun 2019, at 04:20, Kevin Shackleton <krshackleton at gmail.com> wrote:
>
> I am interested in decoding Leica GMX902 and GMX910 data streams.  These
> devices are not specifically listed in the teqc web pages, though other
> Leica devices are:
>
>    - System 500 and 1200 LB2 binary format
>    - Leica MC1000/SR9600 LB2 binary format
>
>
> A quick test of a data stream resulted in a lot of messages that id 0x0e
> data is not handled:
> ! Notice ! 'GMX902.lb2': no routine for Leica LB2 id 0x0e ... skipping
>
> Is there an intention to add GMX901/902/910 LB2 data format to teqc?
>
> Thanks and regards,
> Kevin.
> _______________________________________________
> teqc mailing list
> teqc at postal.unavco.org
> https://postal.unavco.org/mailman/listinfo/teqc
>
>
> _______________________________________________
> teqc mailing list
> teqc at postal.unavco.org
> https://postal.unavco.org/mailman/listinfo/teqc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://postal.unavco.org/pipermail/teqc/attachments/20190618/3a0f501c/attachment.html>


More information about the teqc mailing list